基于有限元计算的全陶瓷微封装燃料芯块等效热导率与微结构设计

兰州理工大学学报 ›› 2022, Vol. 48 ›› Issue (2): 9-15.

基于有限元计算的全陶瓷微封装燃料芯块等效热导率与微结构设计

张旭东^1,2, 邓俊楷^*1, 马大衍¹, 曹慧颖¹, 张瑞谦³, 唐睿³

1.西安交通大学金属材料强度国家重点实验室, 陕西西安 710049;
2.西安交通大学网络信息中心, 陕西西安 710049;
3.中国核动力研究设计院反应堆燃料及材料重点实验室, 四川成都 610213

收稿日期:2021-11-05 出版日期:2022-04-28 发布日期:2022-05-07
通讯作者: 邓俊楷(1976-),男,陕西西安人,博士,教授.Email:junkai.deng@xjtu.edu.cn
基金资助:
中核集团领创科研基金(J202107006)

Effective thermal conductivity and microstructure design of fully ceramic microencapsulated fuel pellet based on finite element calculations

ZHANG Xu-dong^1,2,DENG Jun-kai¹, MA Da-yan¹, CAO Hui-ying¹, ZHANG Rui-qian³, TANG Rui³

1. State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049, China;
2. Network Information Center, Xi'an Jiaotong University, Xi'an 710049, China;
3. Science and Technology on Reactor Fuel and Materials Laboratory, Nuclear Power Institute of China, Chengdu 610213, China

Received:2021-11-05 Online:2022-04-28 Published:2022-05-07

摘要/Abstract

摘要： 为对全陶瓷微封装燃料(FCM)芯块的热导率进行有效研究,利用有限元方法实现球体法预测具有多层包覆结构特征的TRISO 颗粒等效热导率;同时,利用跨尺度等效代表性体积单元对FCM芯块的等效热导率进行计算及优化设计.模拟结果表明:利用有限元模拟实现球体法及跨尺度等效方法可以实现对TRISO颗粒及FCM芯块等效热导率的快速准确预测,TRISO颗粒等效热导率可通过调节SiC层厚度实现提升.提出了将TRISO颗粒设计为FCC填充结构,可使FCM芯块中的燃料颗粒填充量更高,并且其等效热导率可得到显著提升.

关键词: 全陶瓷微封装燃料(FCM), TRISO颗粒, 热导率, 有限方法

Abstract: To study the thermal conductivity of a fully ceramic microencapsulated (FCM) pellet, the sphere method was used to predict the effective thermal conductivity of the multilayered tri-isotropic (TRISO) particle by finite element method. Meanwhile, the effective thermal conductivity of the FCM pellet was calculated by a multi-scale equivalent representative volume element method and optimized by adjusting the content and distribution of TRISO particles. The simulation results showed that the effective thermal conductivity of the TRISO particle and FCM pellet can be predicted quickly and accurately by using the sphere method and the multi-scale equivalent method, and the effective thermal conductivity of the TRISO particle can be improved byadjusting the thickness of the SiC layer.An FCC-stacked microstructure using TRISO presented to makethe FCM pellet possesse higher content fuel particles and exhibits improved heat conduction performance.

Key words: FCM, TRISO particles, thermal conductivity, finite element method

中图分类号:

TB303

张旭东, 邓俊楷, 马大衍, 曹慧颖, 张瑞谦, 唐睿. 基于有限元计算的全陶瓷微封装燃料芯块等效热导率与微结构设计[J]. 兰州理工大学学报, 2022, 48(2): 9-15.

ZHANG Xu-dong,DENG Jun-kai, MA Da-yan, CAO Hui-ying, ZHANG Rui-qian, TANG Rui. Effective thermal conductivity and microstructure design of fully ceramic microencapsulated fuel pellet based on finite element calculations[J]. Journal of Lanzhou University of Technology, 2022, 48(2): 9-15.

参考文献

[1] LU C,KOYANAGI T,KATOH Y,et al.Fully ceramic microencapsulated fuel in prismatic high-temperature gas-cooled reactors:sensitivity of reactor behavior during design basis accidents to fuel properties and the potential impact of the SiC defect annealing process [J].Nuclear Engineering and Design,2019,345:125-147.
[2] YEO S,MCKENNA E,BANEY R,et al.Enhanced thermal conductivity of uranium dioxide-silicon carbide composite fuel pellets prepared by Spark Plasma Sintering (SPS) [J].Journal of Nuclear Materials,2013,433(1/2/3):66-73.
[3] CHUN J H,LIM S W,CHUNG B D,et al.Safety evaluation of accident-tolerant FCM fueled core with SiC-coated zircalloy cladding for design-basis-accidents and beyond DBAs [J].Nuclear Engineering and Design,2015,289:287-295.
[4] ZHOU W,ZHOU W.Enhanced thermal conductivity accident tolerant fuels for improved reactor safety-A comprehensive review [J].Annals of Nuclear Energy,2018,119:66-86.
[5] KIRCHHOFER R,HUNN J D,DEMKOWICZ P A,et al.Microstructure of TRISO coated particles from the AGR-1 experiment:SiC grain size and grain boundary character [J].Journal of Nuclear Materials,2013,432(1/2/3):127-134.
[6] LEE H G,KIM D,LEE S J,et al.Thermal conductivity analysis of SiC ceramics and fully ceramic microencapsulated fuel composites [J].Nuclear Engineering and Design,2017,311:9-15.
[7] FENG C,NI H,CHEN J,et al.Facile method to fabricate highly thermally conductive graphite/PP composite with network structures [J].ACS Appl Mater Interfaces,2016,8(30):19732-19738.
[8] CAO F,FAN X,LIU B,et al.Microstructure and thermal conductivity of fully ceramic microencapsulated fuel fabricated by spark plasma sintering [J].Journal of the American Ceramic Society,2018,101(9):4224-4236.
[9] LIU M,ZENG C,LUO Z,et al.Optimization of the TRISO fuel particle distribution based on octahedral and icosahedral-based segmentation methods in the pebble-bed nuclear core [J].International Journal of Advanced Nuclear Reactor Design and Technology,2020,2:103-110.
[10] WEI H,ZHANG J,DING S.A model for effective thermal conductivity of porous carbon materials in FCM fuel pellets [J].Journal of Nuclear Materials,2019,525:125-139.
[11] LI W,SHIRVAN K.ABAQUS analysis of the SiC cladding fuel rod behavior under PWR normal operation conditions [J].Journal of Nuclear Materials,2019,515:14-27.
[12] DHONDT G.The finite element method for three-dimensional thermomechanical applications [M].England:John Wiley & Sons,2004.
[13] KIM H M,KIM Y W,LIM K Y.Pressureless sintered silicon carbide matrix with a new quaternary additive for fully ceramic microencapsulated fuels [J].Journal of the European Ceramic Society,2019,39(14):3971-3980.
[14] SEGURADO J,LLORCA J.A numerical approximation to the elastic properties of sphere-reinforced composites [J].Journal of the Mechanics and Physics of Solids,2002,50(10):2107-2121.
[15] TERRANI K A,SNEAD L L,GEHIN J C.Microencapsulated fuel technology for commercial light water and advanced reactor application [J].Journal of Nuclear Materials,2012,427(1/2/3):209-224.
[16] COLLIN B P.Modeling and analysis of FCM UN TRISO fuel using the PARFUME code [M].USA:Idaho National Laboratory,2013.
[17] HOLMAN J P.Heat transfer [M].New York:McGraw-Hill,2009.
[18] 辛勇,李垣明,唐昌兵,等.金属基弥散微封装燃料中TRISO燃料颗粒的尺寸优化设计 [J].核动力工程,2019,2:176-179.
[19] MIRKHALAF S M,ANDRADE PIRES F M,SIMOES R.Determination of the size of the representative volume element (RVE) for the simulation of heterogeneous polymers at finite strains [J].Finite Elements in Analysis and Design,2016,119:30-44.
[20] LI S,WONGSTO A.Unit cells for micromechanical analyses of particle-reinforced composites [J].Mechanics of Materials,2004,36(7):543-572.
[21] SU L,WANG H,NIU M,et al.Ultralight,recoverable,and high temperature-resistant SiC nanowire aerogel [J].ACS Nano,2018,12:3103-3111.
[22] SU L,WANG H,NIU M,et al.Anisotropic and hierarchical SiC@SiO₂ nanowire aerogel with exceptional stiffness and stability for thermal superinsulation [J].Science Advances,2020,6:6689(1-9).