基于OpenCL并行的挡板对珠光体生长的相场法模拟

兰州理工大学学报 ›› 2021, Vol. 47 ›› Issue (2): 13-20.

基于OpenCL并行的挡板对珠光体生长的相场法模拟

朱昶胜^*1,2, 李玉杰¹, 马芳兰¹, 冯力², 雷鹏³

1.兰州理工大学计算机与通信学院, 甘肃兰州 730050;
2.兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室, 甘肃兰州 730050;
3.兰州理工大学网络与信息中心, 甘肃兰州 730050

收稿日期:2021-01-03 出版日期:2021-04-28 发布日期:2021-05-11
通讯作者: 朱昶胜(1972-),男,甘肃秦安人,教授,博导.Email:zhucs_2008@163.com
基金资助:
国家自然科学基金(51661020,11504149,11364024)

Phase field simulation of pearlite growth based on OpenCL parallel baffle

ZHU Chang-sheng^1,2, LI Yu-jie¹, MA Fang-lan¹, FENG Li², LEI Peng³

1. College of Computer and Communication, Lanzhou Univ. of Tech., Lanzhou 730050, China;
2. State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metal, Lanzhou Univ. of Tech., Lanzhou 730050, China;
3. Network& Information Center, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2021-01-03 Online:2021-04-28 Published:2021-05-11

摘要/Abstract

摘要： 建立了耦合相场和溶质场的KKSO模型,采用OpenCL并行计算模拟了Fe-C合金共析生长过程,研究了不同形状和不同位置的挡板对层片状珠光体协同生长的影响.结果表明:GPU计算效率相对于串行CPU,最高可达88倍的加速比,并且随着模拟规模的增大,GPU的加速性能越高;挡板的存在直接影响珠光体的形貌演化,其使挡板下方的珠光体生长被限制,穿过挡板间隙的珠光体形貌发生改变;当挡板位于渗碳体和铁素体界面正上方时,挡板两侧渗碳体相合并为不规则形状,渗碳体相前沿碳原子不能满足其生长需求,停止生长,相邻铁素体合为一个相.因此挡板的存在可以控制珠光体的生长形貌.

关键词: KKSO模型, OpenCL, Fe-C合金, 层片状珠光体, 挡板

Abstract: The KKSO model coupling of phase field and solute field was established. OpenCL parallel computing was used to simulate the eutectoid growth process of Fe-C alloy, and the influence of baffles with different shapes and positions on the co-growth of lamellar pearlite was studied. The results show that GPU computing efficiency reach up to 88 times faster than that of serial CPU, and as the simulation scale increases, acceleration performance is higher; the presence of baffles directly affects the evolution of pearlite morphology that is, the growth of pearlite under the bafflewas be restricted, and the morphology of the pearlite passing through the gap of the baffle changed; when the baffle is located directly above the interface between cementite and ferrite, the cementite on both sides of the baffle merges into an irregular shape; the carbon atoms in the front of the cementite phase cannot meet its growth requirements, so that the growth stops, and adjacent ferrites merge into one phase. Therefore, the presence of the baffle can control the growth morphology of pearlite.

Key words: KKSO model, OpenCL, Fe-C alloy, lamellar pearlite, baffle

中图分类号:

TG248
TG244

朱昶胜, 李玉杰, 马芳兰, 冯力, 雷鹏. 基于OpenCL并行的挡板对珠光体生长的相场法模拟[J]. 兰州理工大学学报, 2021, 47(2): 13-20.

ZHU Chang-sheng, LI Yu-jie, MA Fang-lan, FENG Li, LEI Peng. Phase field simulation of pearlite growth based on OpenCL parallel baffle[J]. Journal of Lanzhou University of Technology, 2021, 47(2): 13-20.

参考文献

[1] LIU C,PENG Q,XUE Z,et al.Effect of different heat treatment processes on microstructure evolution andtensile properties of hot-rolled medium-Mn steel[J].Transactions of the Indian Institute of Metals,2020,73(9):2221-2229.
[2] HWANG I,CHO H,NAM S,et al.Effects of post-weld heat treatment on mechanical properties and microstructure of resistancespot-welded lightweight steel[J].The International Journal of Advanced Manufacturing Technology,2019,104(8):4813-4825.
[3] ZHANG Z H,JIANG S Z,ZHAO L,et al.Microstructure and properties of martensite age-hardening stainless steel with vacuum heat treatment[J].Vacuum,2018,55(4):65-68.
[4] ZHANG Y M,LIU L L.Computational design of microstructures of textured ferroelectric ceramics by phase field simulation[J].Computational Materials Science,2019,159:24-31.
[5] CHEN Y,YAN Z Y,LIU W J.Impact of near-PT symmetry on exciting solitons and interactions based on a complex Ginzburg-Landau model[J].Optics Express,2018,26(25):33022-33034.
[6] TU Z X,ZHOU J X,TONG L L,et al.A phase-field study of lamellar eutectic growth with solid-solid boundary anisotropy[J].Journal of Crystal Growth,2020,532:125439(1-8).
[7] ZHANG A,GUO Z P,XIONG S M.Quantitative phase-field lattice-Boltzmann study of lamellar eutectic growth under natural convection[J].Physical Review E,2018,97(5):053302(1-13).
[8] ZHU C S,DENG Z Y,FENG L,et al.Simulation of eutectic growth using phase-field method and LBM based on OpenCL[J].Computational Materials Science,2020,176:109523(1-8).
[9] MUSHONGERA L T,AMOS P G K,NESTLER B,et al.Phase-field simulations of pearlitic divergence in Fe-C-Mn steels[J].Acta Materialia,2018,150:78-87.
[10] NAKAJIMA K,TANAKA Y,HOSOYA Y,et al.Phase-field simulation of cooperative growth of pearlite[J].Materials Science Forum,2007,558-559:1013-1020.
[11] 冯力,高亚龙,朱昶胜,等.层片状珠光体生长形貌的相场法模拟[J].兰州理工大学学报,2018,44(1):11-16.
[12] 张军,陈文雄,郑成武,等.Fe-C-Mn三元合金中奥氏体-铁素体相变的相场模拟[J].金属学报,2017,53(6):760-768.
[13] 王华明,唐亚俊.单晶 Ni 基高温合金侧向约束条件下的凝固行为[J].材料研究学报,1993,7(2):99-104.
[14] 杜立飞,张蓉,邢辉,等.横向限制下凝固微观组织演化的相场法模拟[J].物理学报,2013,62(10):106401(1-6).
[15] ZHANG D Q,YIN Y,ZHOU J,et al.Effects of carbide on the cooperative growth of pearlite in carbon steel:a phase field study[J].Isij International,2017,57(10):1851-1859.
[16] ZHU C S,LIU J Q,FENG L,et al.Research on the simulation of PF-LBM model based on MPI+CUDA mixed granularity parallel[J].AIP Advances,2018,8(6):065017(1-11).
[17] SHI X M,HUANG H B,CAO G P,et al.Accelerating large-scale phase-field simulations with GPU[J].AIP Advances,2017,7(10):105216(1-10).
[18] MOSSAIBY F,SHOJAEI A,ZACCARIOTTO M,et al.OpenCL implementation of a high performance 3D Peridynamic model on graphics accelerators[J].Computers and Mathematics with Applications,2017,74(8):1856-1870.
[19] HALVER R,HOMBERG W,SUTMANN G.Function portability of molecular dynamics on heterogeneous parallel architectures with OpenCL[J].Journal of Supercomputing,2018,74(4):1-12.
[20] FABIEN-OUELLET G,GABRIEL E,GLOAGUEN B,et al.Time-domain seismic modeling in viscoelastic media for full waveform inversion on heterogeneous computing platforms with OpenCL[J].Computers &Geosciences,2017,100:142-155.
[21] KIM S G,KIM W T,SUZUKI T,et al.Phase-field modeling of eutectic solidification[J].Journal of Crystal Growth,2004,261(1):135-158.