兰州理工大学学报 ›› 2021, Vol. 47 ›› Issue (3): 86-90.

• 自动化技术与计算机技术 • 上一篇    下一篇

一种宽带带通三维频率选择表面设计及分析

于正永*1,2, 朱建平3, 唐万春2   

  1. 1.江苏电子信息职业学院 计算机与通信学院, 江苏 淮安 223003;
    2.南京师范大学 物理科学与技术学院, 江苏 南京 210023;
    3.南京理工大学 电子工程与光电技术学院, 江苏 南京 210094
  • 收稿日期:2019-12-13 出版日期:2021-06-28 发布日期:2021-07-19
  • 通讯作者: 于正永(1982-),男,江苏淮安人,博士,副教授.Email:yonglly@sina.com
  • 基金资助:
    江苏高校“青蓝工程”资助项目(苏教师函[2020]10号),江苏省“333工程”科研资助项目(BRA2018315),江苏省高等学校自然科学研究项目(19KJB510002),江苏省“333高层次人才培养工程”培养对象(苏人才办[2018]26号)

Design and analysis of wideband bandpass three-dimensional frequency selective surface

YU Zheng-yong1,2, ZHU Jian-ping3, TANG Wan-chun2   

  1. 1. School of Computer and Communication, Jiangsu Vocational College of Electronics Information, Huai’ an 223003, China;
    2. School of Physics and Technology, Nanjing Normal University, Nanjing 210023, China;
    3. School of Electronic and Optical Engineering, Nanjing University of Science and Technology, Nanjing 210094, China
  • Received:2019-12-13 Online:2021-06-28 Published:2021-07-19

摘要: 基于方形波导结构提出了一种宽带带通三维频率选择表面(3D FSS).所提出的FSS的单元结构由上下端面刻蚀两个相同正方形金属贴片的介质方块和空气方形波导组成,此时每个端面形成了方形槽谐振单元.在电磁耦合作用下,方形槽谐振单元原有单一的谐振模式耦合分裂为奇模和偶模两种谐振模式,由此产生了两个传输极点,从而形成了一个平坦的二阶通带,且通带3 dB相对带宽为25.12%.通过等效电路模型,阐明了该FSS的工作原理.仿真结果显示:在TE和TM两种极化方式下,以0°到45°角度入射时所提出的FSS具有稳定的频率响应.此外,该3D FSS还具有相对较小的单元结构.

关键词: 频率选择表面(FSS), 宽带, 带通, 等效电路模型(ECM), 三维(3D)

Abstract: A wideband bandpass three-dimensional frequency selective surface (3D FSS) is proposed based on the square waveguide structure. The unit cell of the proposed FSS consists of a cuboid dielectric block with two identically-sized metallic square patches on the top and bottom surfaces and an air-filled square waveguide, in which each surface provides a square slot resonant structure.Theoriginal single resonant mode of the square slot resonance will split into even- or odd- resonant modes by the electromagnetic coupling. Thus, two transmission poles are introduced for obtaining a flat passband with second-order response, and its 3 dB fractional bandwidth of the passband is 25.12%.The operating principle of the proposed FSS is explained by the equivalent circuit model. The simulated results show that the proposed FSS exhibits a stable response to variations of incident angle from 0° to 45° under both TE and TM polarizations. In addition, this 3D FSS has a relatively small unit cell.

Key words: frequency selective surface (FSS), wideband, bandpass, equivalent circuit model (ECM), three-dimensional (3D)

中图分类号: