极限载荷下风力发电机轮毂损伤分析

兰州理工大学学报 ›› 2022, Vol. 48 ›› Issue (5): 65-69.

极限载荷下风力发电机轮毂损伤分析

郑玉巧^*, 靳红红, 赵锋, 卢秉喜, 李浩, 何正文

兰州理工大学机电工程学院, 甘肃兰州 730050

收稿日期:2021-01-20 出版日期:2022-10-28 发布日期:2022-11-21
通讯作者: 郑玉巧(1977-),女,甘肃庄浪人,博士,博导. Email:zhengyuqiaolut@163.com
基金资助:
国家自然科学基金(51965034),兰州市人才创新创业项目(2018-RC-25)

Damage analysis of wind turbine hub under random ultimate load

ZHENG Yu-qiao, JIN Hong-hong, ZHAO Feng, LU Bing-xi, LI Hao, HE Zheng-wen

School of Mechanical and Electrical Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2021-01-20 Online:2022-10-28 Published:2022-11-21

摘要/Abstract

摘要： 针对传统风力发电机轮毂服役载荷环境的不确定性和多样性,在极限载荷下进行风力发电机轮毂损伤研究和结构优化.首先,按叶片坐标系对轮毂模型施加极限载荷,得到轮毂应力云图,求解轮毂在极限工况下的强度;然后,结合S-N曲线和Miner累积损伤准则对轮毂等效应力进行平均应力修正,求解轮毂表面的损伤变化规律;最后,对轮毂结构进行结构拓扑优化,并对优化后的轮毂进行重新建模和静强度分析.结果表明:结构优化后轮毂质量减少9.2%,满足强度要求,为后续轮毂结构优化提供理论基础.

关键词: 轮毂, 极限载荷, 应力, 损伤

Abstract: In view of the uncertainty and diversity of traditional wind turbine hubs load environment, the damage of wind turbine hubs under ultimate load was studied, then the structure was optimized. Specifically, the ultimate load is exerted to the turbine hub according to the blade coordinate system to obtain the strength of the hub under the ultimate working condition, the stress nephogram of hub was obtained and the strength of the hub under the ultimate working condition was solved. Then, for the variational law of the damage on the hub surface, the S-N curve and the Miner cumulative damage criterion were combined to correct the average stress of the equivalent stress of the hub. Finally, the topology structure of the hub was optimized, the optimized hub was remodeled and the static strength analysis was carried out.The results indicated that the optimizedhub mass was decreased by 9.2%,which met the strength requirements and provided a theoretical basis for subsequent hub structure optimization.

Key words: wheel hub, ultimate load, stress, damage

中图分类号:

TK83

郑玉巧, 靳红红, 赵锋, 卢秉喜, 李浩, 何正文. 极限载荷下风力发电机轮毂损伤分析[J]. 兰州理工大学学报, 2022, 48(5): 65-69.

ZHENG Yu-qiao, JIN Hong-hong, ZHAO Feng, LU Bing-xi, LI Hao, HE Zheng-wen. Damage analysis of wind turbine hub under random ultimate load[J]. Journal of Lanzhou University of Technology, 2022, 48(5): 65-69.

参考文献

[1] MUYAN C,COKER D.Strength analysis of a 5-m composite wind turbine blade under static and fatigue loading conditions [J].IOP Conference Series:Materials Science and Engineering, 2020, 942(1):012045.
[2] LUHMANN B,SEYEDIN H,CHENG P W.Aero-structural dynamics of a flexible hub connection for load reduction on two-bladed wind turbines [J].Wind Energy,2017,20(3):521-535.
[3] RAVIKUMAR S,JASWANTHVENKATRAM V,SAI KUMAR Y J N V,et al.Design and analysis of wind turbine blade hub using aluminium alloy AA 6061-T6 [J].IOP Conference Series:Materials Science and Engineering,2017,197(1):012044.
[4] 刘雄辉,李德源,吕文阁,等.水平轴风力机轮毂强度和疲劳寿命分析方法研究 [J].太阳能学报,2012,33(5):763-768.
[5] HWANG B K,KIM T S.An investigation on ultimate strength of high strength aluminum alloys four-bolted connections with out-of-plane deformation [J].International Journal of Steel Structures,2019,19(4):1158-1170.
[6] 李有堂,王标.随机振动下镍钛形状记忆合金管接头的疲劳寿命分析 [J].兰州理工大学学报,2020,46(3):155-159.
[7] RADCHENKO A,KRIVOSHEINA M,KOBENKO S,et al.Modeling of orthotropic plate fracture under impact load using various strength criteria [J].AIP Conference Proceedings,2017,1800(1):040017.
[8] 陈棋,翁海平,吴晨.大型风电机组轮毂疲劳分析方法的研究 [J].太阳能学报,2015,36(9):2263-2268.
[9] 马进骁,李永贵,肖翅翔,等.水平轴风力机轮毂风荷载特性试验研究 [J].动力学与控制学报,2020,18(5):63-71.
[10] 马立鹏,杨生,孟春玲,等.兆瓦级风机变桨轴承与轮毂连接螺栓的疲劳分析 [J].机械强度,2020,42(1):208-215.
[11] KANG J,LIU H P,FU D Y.Fatigue life and strength analysis of a main shaft-to-hub bolted connection in a wind turbine [J].Energies,2019,12(1):1-14.
[12] XU P F,DUAN S Y,WANG F.Reverse modeling and topological optimization for lightweight design of automobile wheel hubs with hollow ribs [J].International Journal of Computational Methods,2019,17(9):1-12.
[13] 何玉林,刘桦,刘平,等.基于GL规范的大型风力发电机组轮毂强度数值分析 [J].机械科学与技术,2009,(4):522-526.
[14] WANG Q,LI R,ZHU Y F,et al.Integration design and parameter optimization for a novel in-wheel motor with dynamic vibration absorbers [J].Journal of the Brazilian Society of Mechanical Sciences and Engineering,2020,42(9):1-12.
[15] 卢磊,张礼达,徐志坚.基于ANSYS的1.5 MW水平轴风力机轮毂壁厚的优化与强度分析 [J].西华大学学报(自然科学版),2014,33(5):109-112.