轻钢龙骨-黄麻纤维生物基面板组合墙体抗震性能分析

兰州理工大学学报 ›› 2022, Vol. 48 ›› Issue (5): 126-133.

轻钢龙骨-黄麻纤维生物基面板组合墙体抗震性能分析

吴长^*1,2, 陈星宏¹, 刘家乐¹

1.兰州理工大学土木工程学院, 甘肃兰州 730050;
2.兰州理工大学西部土木工程防灾减灾教育部工程研究中心, 甘肃兰州 730050

收稿日期:2020-08-31 出版日期:2022-10-28 发布日期:2022-11-21
通讯作者: 吴长(1981-),女,甘肃兰州人,博士,副教授. Email:280863504@qq.com
基金资助:
国家重点研发计划(2019YFD1101003),甘肃省建设科技攻关项目(JK2021-41)

Analysis of seismic performance of the light-gauge steel and jute fiber bio-based panel composite wall

WU Chang^1,2, CHEN Xing-hong¹, LIU Jia-le¹

1. School of Civil Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China;
2. Western Center of Disaster Mitigation in Civil Engineering of Education, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2020-08-31 Online:2022-10-28 Published:2022-11-21

摘要/Abstract

摘要： 为推动生物基纤维材料在绿色装配式生态村镇住宅中的应用,将黄麻纤维生物基面板作为轻钢龙骨墙体的覆面板材料,形成装配式组合墙体.通过理化性能实验和SEM实验测定黄麻纤维生物基面板的弹性模量和静曲强度,并分析面板的微观构造组成.利用ANSYS/Structural有限元软件建立基于半刚性节点连接的组合墙体计算简化模型,分析不同面板厚度对组合墙体抗震耗能性能的影响.结果表明:黄麻纤维生物基面板的弹性模量和静曲强度要远大于传统的OSB板;增加黄麻纤维生物基面板的厚度能增强组合墙体的塑性变形能力,减小刚度退化幅度,提高刚度残余;组合墙体的抗震性能和能量耗散能力更优.

关键词: 轻钢龙骨墙体, 生物基面板, 刚度退化, 抗震耗能

Abstract: In order to promote the application of bio-based fiber materials in green prefabricated ecological village houses, jute fiber bio-based panels are used as the cladding materials of the light-gauge steel wall to form prefabricated composite wall. The elastic modulus and static bending strength of jute fiber bio-based panels were measured through physical and chemical properties experiment and SEM experiment, and the microstructure composition of the panel was analyzed. The simplified calculation model of composite wall based on semi-rigid node connection was established by using ANSYS/Structural finite element software, and the influence of different panel thickness on the seismic energy dissipation performance of composite wall was analyzed. The results show that the elastic modulus and static bending strength of the jute fiber bio-based panel are much greater than that of the traditional OSB panel. Increasing the thickness of the jute fiber bio-based panel can enhance the plastic deformation ability of the composite wall, reduce the extent of stiffness degradation, and increase the residual stiffness. The combined wall has better seismic performance and energy dissipation capacity.

Key words: light-gauge steel wall, bio-based panel, stiffness degradation, anti-vibration energy consumption

中图分类号:

TU392.1

吴长, 陈星宏, 刘家乐. 轻钢龙骨-黄麻纤维生物基面板组合墙体抗震性能分析[J]. 兰州理工大学学报, 2022, 48(5): 126-133.

WU Chang, CHEN Xing-hong, LIU Jia-le. Analysis of seismic performance of the light-gauge steel and jute fiber bio-based panel composite wall[J]. Journal of Lanzhou University of Technology, 2022, 48(5): 126-133.

参考文献

[1] 黄炜,张振中,赵冬,等.几种新型工业化住宅结构体系综述 [J].工业建筑,2012,42(8):121-127.
[2] 陈国强,王颖.中国“生物基材料”研究和产业化进展 [J].生物工程学报,2015,31(6):955-967.
[3] 陈国强.我国生物基材料的发展和应用状况 [J].生物产业技术,2007(2):54-59.
[4] 吴蓉.脱硫石膏—秸秆—聚苯颗粒新型墙板的试验研究 [J].新型建筑材料,2016,43(7):97-99.
[5] 李晓东,康永康,宋子阳.纤维石膏基复合墙材基本力学性能试验研究 [J].硅酸盐通报,2019,38(6):1935-1941.
[6] 岳孔,李萌禹,刘健,等.麦秸石膏复合材料力学性能和抗火性能研究 [J].农业工程学报,2019,35(18):308-316.
[7] 雒锋,金玉杰.秸秆灰制备硅酸钙板的研究 [J].新型建筑材料,2020,47(9):35-39.
[8] 张波.带板带和斜撑的筑巢轻钢龙骨组合墙体抗侧性能试验研究 [D].重庆:重庆大学,2013.
[9] 李元齐,马荣奎.冷弯薄壁型钢龙骨式剪力墙抗震性能简化及精细化数值模拟研究 [J].建筑钢结构进展,2017,19(6):25-34.
[10] KHALIQ W,MOGHIS A.Shear capacity of cold-formed light-gauge steel framed shear-wall panels with fiber cement board sheathing [J].International Journal of Steel Structures,2017,17(4):1404-1414.
[11] ZEYNALIAN M,SHAHRASBI A Z,RIAHI H T.Seismic response of cold formed steel frames sheathed by fiber cement boards [J].International Journal of Civil Engineering,2018,16(11):1-11.
[12] ZHOU B,LIU M,WANG C.Evaluation of bending capacity of a new type of cold-formed steel frame wall sheathed by fiber-cement pressure panels [J].International Journal of Steel Structures,2018,18(1):317-335.
[13] 胡志成.装配式钢骨架纤维增强水泥板组合墙板力学性能研究 [D].南昌:南昌大学,2020.
[14] XU Zhifeng,ZHANG Jing,CHEN Zhongfan,et al.Axial compressive behavior of new HFC-filled CTS composite walls sheathed with straw-fiber boards-Science Direct [J].Structures, 2020, 28(5):2582-2595.
[15] 闫维明,王曼,张文莹.带铅阻尼器冷弯薄壁型钢组合墙抗震性能试验 [J].哈尔滨工业大学学报,2020,52(8):10-19.
[16] 田稳苓,温晓东,彭佳斌,等.设置方钢管连接件的泡沫混凝土轻钢龙骨复合墙体受力性能试验研究 [J].建筑结构学报,2021,42(3):124-133.
[17] 马杰,王卫永,邢永辉,等.装配式刚边框-冷弯薄壁型钢骨架组合墙体受力性能研究 [J].建筑钢结构进展,2021,23(3):23-33.
[18] 北京林业大学.定向刨花板:LY/T 1580-2010 [S].北京:中国标准出版社,2010.
[19] 中国林业科学研究院木材工业研究所.人造板及饰面人造板理化性能试验方法:GB/T 17657-2013 [S].北京:中国标准出版社,2014.
[20] 张天平. 筑巢轻钢结构体系节点半刚性试验研究与墙体抗侧性能分析[D].重庆:重庆大学,2013.
[21] 中华人民共和国住房和城乡建设部.建筑抗震试验规程:JGJ/T 101-2015 [S].北京:中国建筑工业出版社,2015.