风力发电机组塔架的仿竹结构设计

兰州理工大学学报 ›› 2023, Vol. 49 ›› Issue (1): 49-54.

风力发电机组塔架的仿竹结构设计

魏泰^*1, 董付刚²

1.甘肃省特种设备检验检测研究院, 甘肃兰州 730050;
2.兰州理工大学机电工程学院, 甘肃兰州 730050

收稿日期:2021-04-20 出版日期:2023-02-28 发布日期:2023-03-21
通讯作者: 魏泰(1983-),男,甘肃庆阳人,高级工程师. Email:weitai0931@163.com

Bionics design of wind turbine tower based on bamboo structure

WEI Tai¹, DONG Fu-gang²

1. Gansu Province Special Equipment Inspection and Testing Institute, Lanzhou 730050, China;
2. School of Mechanical and Electrical Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2021-04-20 Online:2023-02-28 Published:2023-03-21

摘要/Abstract

摘要： 针对风力发电机组塔架高耸结构稳定性问题,结合仿生结构设计理论,将竹子纤维束引入塔架结构,研究通过仿竹结构设计提高塔架稳定性的方法.以2 MW风力发电机组塔架为研究对象,采用层次分析法对竹子与塔架的相似度进行计算,验证生物选型的合理性.通过研究竹子纤维束特征与竹身稳定性的关系,设计出具有4根加劲肋的仿竹塔架.应用有限元数值分析方法对仿竹塔架和原型塔架的静态和动态效能进行分析,结果表明:仿竹塔架的塔顶位移和最大应力相较原型塔架分别降低了2.27%和13.48%,仿竹塔架前两阶固有频率相较原型塔架提升了1.31%和1.58%,仿竹塔架结构整体稳定性提升了1.4%.验证2 MW风力发电机组塔架仿竹设计的可行性可为后续塔架结构设计提供新的方法.

关键词: 仿生, 结构设计, 竹子, 塔架, 加劲肋

Abstract: To address the stability problem of the towering structure of wind turbine tower, the bamboo vascular bundles were introduced into the tower structure according to the bionic structure design theory. The method of improving the stability of the tower is studied through the design of a bamboo structure. Taking the 2 MW wind turbine tower as theobject of study, the Analytic Hierarchy Procedure (AHP) is applied to calculate the similarity between the bamboo and the tower to verify the rationality of the biological selection. By studying the relationship between the characteristics of bamboo vascular bundles and the stability of the bamboo, a bionic bamboo tower with four stiffening ribs was designed. Finite element analysis is employed to comparatively investigate the performance of the bionic bamboo tower and the original tower in the static and dynamic. Through the investigation, it is suggested that the maximum deformation and maximum stress can be reduced by 2.27% and 13.48% of the bionic bamboo tower, respectively. This approach results in 1.31% and 1.58% increase respectively in the first and second natural frequencies. Moreover, the overall stability of the bionic bamboo tower structure is improved by 1.4%. The feasibility of the bionic design of 2MW wind turbine towers is verified here, and a new method for the design of subsequent tower structures is provided.

Key words: bionic, structure design, bamboo, wind turbine tower, reinforcement ribs

中图分类号:

TK83
TH122

魏泰, 董付刚. 风力发电机组塔架的仿竹结构设计[J]. 兰州理工大学学报, 2023, 49(1): 49-54.

WEI Tai, DONG Fu-gang. Bionics design of wind turbine tower based on bamboo structure[J]. Journal of Lanzhou University of Technology, 2023, 49(1): 49-54.

参考文献

[1] ZHENG Y Q,ZHANG L,PAN Y X,et al.Multi-objective structural optimization of a wind turbine tower [J].Journal of Shanghai Jiaotong University (Science),2020,25(4):538-544.
[2] 郑玉巧,和哲,张璐,等.基于均匀设计的风力机塔架结构参数优化研究 [J].太阳能学报,2020,41(4):221-226.
[3] SATO M,TANIGAKI T,SATO Y,et al.Optimal structural properties of cylindrical structures learning from morphology of wild bamboos with peculiar nodes and vascular bundles [J].Transactions of the Japan Society of Civil Engineers A2 (Applied Mechanics),2016,72(2):25-34.
[4] 王希慧,宋波,徐明磊.仿竹设计在高耸薄壁脱硫塔结构中的应用 [J].哈尔滨工业大学学报,2020(8):55-61.
[5] 付为刚,程文明,于兰峰,等.正轨箱梁横向肋的竹子结构仿生学设计 [J].西南交通大学学报,2013(2):211-216.
[6] ZOU M,XU S C,WEI C G,et al.A bionic method for the crashworthiness design of thin-walled structures inspired by bamboo [J].Thin-Walled Structures,2016,101:222-230.
[7] ZHAO L,CHEN W Y,MA J F,et al.Structural bionic design and experimental verification of a machine tool column [J].Journal of Bionic Engineering,2008,5(8):46-52.
[8] 孙瑞,李春,陈文朴.基于仿竹设计的风力机塔架力学性能分析 [J].热能动力工程,2018,33(5):126-132.
[9] 刘旺玉,张勇,陈龙.大型水平轴风力机多体系统的动力学分析与仿竹设计 [J].华南理工大学学报(自然科学版),2011(4):44-49.
[10] AKRAMI V,ERFANI S.An analytical and numerical study on the buckling of cracked cylindrical shells [J].Thin-Walled Structures,2017,119: 457-469.
[11] PALOMBINI F L,NOGUEIRA F M,JUNIOR W K,et al.Biomimetic systems and design in the 3D characterization of the complex vascular system of bamboo node based on X-ray microtomography and finite element analysis [J].Journal of Materials Research,2020,35(8):842-854.
[12] 尹维,田煜,陶大帅,等.天然树木和竹子纤维材料的力学性能及仿生研究进展 [J].科学通报,2015(31):2949-2962.
[13] PALOMBINI F L,MARAIATH J,OLIVEIRA B.Bionic design of thin-walled structure based on the geometry of the vascular bundles of bamboo [J].Thin-Walled Structures,2020,155: 1-12.
[14] MA J F,CHEN W Y,ZHAO L,et al.Elastic buckling of bionic cylindrical shells based on bamboo [J].Journal of Bionic Engineering,2008(3):231-238.
[15] LI H B,SHEN S P.The mechanical properties of bamboo and vascular bundles [J].Journal of Materials Research,2011,26(21):2749-2756.
[16] ZHANG T C,WANG A L,WANG Q S,et al.Bending characteristics analysis and lightweight design of a bionic beam inspired by bamboo structures [J].Thin-Walled Structures,2019,142:476-498.
[17] International Electrotechnical Commision.Wind energy generation Systems-Part 1:Design requirments,IEC 61400-1-2019 [S].Switzerland: International Electrotechnical Commision,2019.
[18] 郑玉巧,曹永勇,张亮亮,等.耦合加载方式下复合材料叶片的预应力模态分析 [J].动力学与控制学报,2018,67(4):84-90.
[19] 郭兰慧,牛奔,杨诗君.薄壁及加劲圆钢管的抗弯性能研究 [J].土木工程学报,2013,46(8):19-27.
[20] 陈俊岭,何欣恒,丛欧.基于改进遗传算法的钢-混组合式风电机组塔架优化设计研究 [J].太阳能学报,2021,42(7):359-365.