[1] 李德才,袁祖贻.磁流体密封齿型的理论分析与实验 [J].流体机械,1995,23(12):3-7. [2] 李望旭,李正贵,袁久越,等.变运行参数的磁性液体密封中磁液温度特性分析 [J].润滑与密封,2021,46(9):61-67. [3] MERKLEIN M,ROSEL S.Characterization of a magnetorheological fluid with respect to its suitability for hydroforming [J].International Journal of Material Forming,2010,3(1):283-286. [4] XU Biao,LUO Yiping,REN Hongjuan.Review on magneto-rheological fluid and its application [J].Am.J.Nanosci.Nanotechnol,2014,2(4):70-74. [5] MOSKOWITZ R.Dynamic sealing with magnetic fluids [J].Asle Transactions,1975,18(2):135-143. [6] ZHOU H L,ZHAO W,ZHANG H D,et al.Magnetorheological seal:A review[J].International Journal of Applied Electromagnetics and Mechanics,2020,62(4):763-786. [7] 牧振伟,贵辛未,夏庆成,等.基于CFD的主轴密封泵板装置结构优化设计 [J].排灌机械工程学报,2021,39(1):1-7. [8] 黎义斌,王 岩,歹晓晖,等.不同密封结构对离心泵叶轮轴向窜动的敏感性分析 [J].排灌机械工程学报,2021,39(2):122-127. [9] 韩宝华,黎义斌,王秀勇,等.核主泵密封间隙对轴向力影响的敏感度分析 [J].排灌机械工程学报,2019,37(8):662-667. [10] 吴 磊,孙大新,刘中国,等.磁流体密封技术简介 [J].液压气动与密封,2015,35(8):70-73. [11] VAN-DER-WAL K,VAN-OSTAYEN R A J,LAMPAERT S G E.Ferrofluid rotary seal with replenishment system for sealing liquids [J].Tribology International,2020,150:106372. [12] YANG Xiaolong,SUN Peng,HAO Fuxiang.Magnetic field finite element analysis of diverging stepped ferrofluid seal with a large gap and two magnetic sources [J].International Journal of Applied Electromagnetics and Mechanics,2020,63(1):31-44 [13] LIU T G,CHENG Y S,YANG Z Y.Design optimization of seal structure for sealing liquid by magnetic fluids [J].Journal of Magnetism and Magnetic Materials,2005,289:411-414. [14] ZHAO Meng,ZOU Jibin,HU Jianhui.An analysis on the magnetic fluid seal capacity[J].Journal of Magnetism and Magnetic Materials,2006,303(2):428-431. [15] QIAN J G,YANG Z Y.Characteristics of a magnetic fluid seal and its motion in an axial variable seal gap [J].Journal of China University of Mining and Technology,2008,18(4):634-636. [16] WILLIAMS R A,MALSKY H.Some experiences using a ferrofluid seal against a liquid [J].IEEE Transactions on Magnetics,1980,16(2):379-381. [17] 李仁年,谭海燕,李琪飞,等.水泵水轮机转轮区域脉动特性分析 [J].排灌机械工程学报,2015,33(12):1038-1043 [18] 黎义斌,何 慧,范兆京,等.叶顶间隙对斜流泵叶轮内部空化流动的影响 [J].排灌机械工程学报,2020,38(3):224-229. [19] 程效锐,魏彦强,吴 超,等.动静转子间隙比对核主泵水力性能的影响 [J].排灌机械工程学报,2020,38(10):979-984. [20] 赵万勇,陈 帅,赵 强,等.蜗壳断面面积变化规律对双吸离心泵水力性能的影响 [J].排灌机械工程学报,2020,38(9):871-877. [21] 杨 华,孙丹丹,汤方平,等.轴流泵非稳定工况下叶轮进口流场实验研究 [J].排灌机械工程学报,2011,29(5):406-410. |