考虑90°子铺层的T300/69层合板断裂韧性数值模拟和实验研究

兰州理工大学学报 ›› 2023, Vol. 49 ›› Issue (6): 33-40.

考虑90°子铺层的T300/69层合板断裂韧性数值模拟和实验研究

韦尧兵^*1, 王雪雪¹, 靳翌帆², 刘俭辉¹, 郎珊珊¹

1.兰州理工大学机电工程学院, 甘肃兰州 730050;
2.西安咸阳国际机场股份有限公司, 陕西西安 710000

收稿日期:2022-03-14 出版日期:2023-12-28 发布日期:2024-01-05
通讯作者: 韦尧兵(1965-),男,甘肃靖远人,研究员.Email:ybwei0730@163.com
基金资助:
国家自然科学基金青年基金(51605212),甘肃省科技计划项目(21JR7RA783,20JR10RA161),甘肃省青年博士基金(2021QB-139)

Numerical simulation and experimental research on fracture toughness of T300/69 laminated considering 90° sub-layup

WEI Yao-bing¹, WANG Xue-xue¹, JIN Yi-fan², LIU Jian-hui¹, LANG Shan-shan¹

1. School of Mechanical and Electrical Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China;
2. Xi’an Xianyang International Airport Limited Company, Xi’an 710000, China

Received:2022-03-14 Online:2023-12-28 Published:2024-01-05

摘要/Abstract

摘要： 针对现有复合材料层合板断裂韧性计算模型忽略了90°子铺层和纤维脱粘对断裂韧性的影响,提出了修正的断裂韧性计算方法.首先,在研究正交异性纤维增强复合材料断裂韧性时,借助ABAQUS有限元软件,使用扩展有限元法模拟T300/69纤维增强复合材料层合板裂纹扩展过程,分析90°子铺层对层合板整体断裂韧性的影响.其次,考虑纤维脱粘效应结合能量释放率建立考虑90°子铺层影响的断裂韧性模型.最后,通过紧凑拉伸实验,利用位移-载荷数据研究不同铺层方式下T300/69复合材料层合板的断裂韧性,验证该模型的准确性.结果表明,该模型所得断裂韧性与实验结果误差较小,更贴近实际情况,对实际工程具有较为重要的指导意义.

关键词: 能量释放率, 断裂韧性, 90°子铺层, 纤维脱粘

Abstract: A modified fracture toughness calculation method is proposed in this research to address the shortcoming that the existing fracture toughness calculation model for composite laminates ignores the effects of 90° sub-layers and fiber debonding on fracture toughness. First, in the study of fracture toughness of orthotropic anisotropic fiber-reinforced composites, an extended finite element method is used to simulate the crack expansion process of T300/69 fiber-reinforced composite laminate with the help of ABAQUS finite element software to analyze the effect of 90° sub-layers on the overall fracture toughness of the laminate. Next, the fracture toughness model considering the effect of fiber debonding combined with energy release rate was established considering the effect of 90° sub-layers. Finally, the fracture toughness of T300/69 composite laminate under different paving methods is studied by compact tensile experiments using displacement-load data to verify the accuracy of the model. The results show that the fracture toughness obtained from the model proposed in this paper exhibits minimal disparities from the experimental results, thereby rending it more representative of the real-world applications. The proposed model holds significant practical implications for practical engineering.

Key words: energy release rate, fracture toughness, 90° sub-layup, fiber debonding

中图分类号:

TH114
O346.2

韦尧兵, 王雪雪, 靳翌帆, 刘俭辉, 郎珊珊. 考虑90°子铺层的T300/69层合板断裂韧性数值模拟和实验研究[J]. 兰州理工大学学报, 2023, 49(6): 33-40.

WEI Yao-bing, WANG Xue-xue, JIN Yi-fan, LIU Jian-hui, LANG Shan-shan. Numerical simulation and experimental research on fracture toughness of T300/69 laminated considering 90° sub-layup[J]. Journal of Lanzhou University of Technology, 2023, 49(6): 33-40.

参考文献

[1] ZHANG X S,CHEN Y J,HU J L.Recent advances in the development of aerospace materials[J].Progress in Aerospace Sciences,2018,97:22-34.
[2] 张丽华,范玉青.复合材料在飞机上的应用评述[J].航空制造技术,2006,8 (3):64-66.
[3] WU G H,ZHOU E,WANG R,et al.The experimental research of the damage resistance of low-energy impacted carbon fiber composite materials[C]//2015 IEEE Far East NDT New Technology and Application Forum(FENDT).New York:IEEE,2015:124-128.
[4] 张双寅.CSM玻璃钢复合型断裂有限元分析[J].应用数学和力学,1986,8(7):689-702.
[5] WADDOUPS M E,EISENMAN J R,KAMINSKI B E.Macroscopic fracture mechanics of advanced composite materials[J].Journal of Composite Materials,1971,5:446-454.
[6] WHITNEY J M,NUISMERr R J.Stress fracture criteria for laminated composites containing stress concentrations[J].Journal of Composite Materials,1974,8(3):253-265.
[7] 储辰辰,蔡恒,乔晓军,等.多尺度方法预测复合材料层板裂纹扩展[J].西安电子科技大学学报,2018,45(3):45-51.
[8] 刘岩松,张子健,李志歆,等.铺层结构对复合材料层合板拉伸性能的影响[J].复材结构与制造,2019,62(4):47-50.
[9] 孙国芹,尚德广,王杨.金属多轴疲劳行为与寿命预测研究进展[J].机械工程学报,2021,57(16):153-172.
[10] 王昊元,吴昊.基于改进临界距离法的多轴缺口疲劳寿命预测[J].工程机械,2020,51(9):31-40.
[11] 杨江波,黄争鸣,薛元德,等.基于断裂韧性预报复合材料层合板的开孔拉伸强度[J].复合材料学报,2019,36(4):860-870.
[12] AOKI R,HIGUCHI R,YOKOZEKI T,et al.Effects of ply thickness and 0°-layer ratio on failure mechanism of open-hole and filled-hole tensile tests of thin-ply composite laminates[J].Composite Structures,2022,280:114926.
[13] ARONSSON C G,BACKLUND J.Tensile fracture of laminates with cracks[J].Journal of Composite Materials,1986,20(3):287-307.
[14] BAO G,HO S,SUO Z,et al.The role of material orthotropy in fracture specimens for composites[J].International Journal of Solids and Structures,1992,29(9):1105-1116.
[15] VAIDYA R S,SUN C T.Fracture criterion for notched thin composite laminates[J].AIAA Journal,1997,35(2):311-316.
[16] CAMANHO P P,CATALANOTTI G.On the relation between the mode I fracture toughness of a composite laminate and that of a 0°ply:Analytical model and experimental validation[J].Engineering Fracture Mechanics,2011,78(13):2535-2546.
[17] SHIBANUMA K,SUZUKI Y.A model of cleavage crack propagation in a BCC polycrystalline solid based on the extended finite element method Engineering[J].Acta Materialia,2019,176:232-241.
[18] KOZAR I,MALIC N T.Stochastic properties of bond-slip parameters at fibre pull-out[J].Engineering Failure Analysis,2020,111:104478.