叶片进口边位置对快堆二回路钠泵   空化性能的影响

兰州理工大学学报 ›› 2020, Vol. 46 ›› Issue (5): 53-60.

叶片进口边位置对快堆二回路钠泵空化性能的影响

杨从新^1,2, 余长虹^1,2, 于洪昌³, 牛红军³

1.兰州理工大学能源与动力工程学院, 甘肃兰州 730050;
2.兰州理工大学甘肃省流体机械及系统重点实验室, 甘肃兰州 730050;
3.沈阳鼓风机集团核电公司, 辽宁沈阳 110020

收稿日期:2018-05-14 出版日期:2020-10-28 发布日期:2020-11-06
作者简介:杨从新(1964-),男,陕西兴平人,博士,教授,博导.
基金资助:
国家重大专项(600-CFR-1498)

Effect of blade inlet position on cavitation performance of the secondary circuit coolant pump of sodium-cooled fast reactor

YANG Cong-xin^1,2, YU Chang-hong^1,2, YU Hong-chang³, NIU Hong-jun³

1. College of Energy and Power Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China;
2. Key Laboratory of Fluid Machinery and Systems of Gansu Province, Lanzhou Univ. of Tech., Lanzhou 730050, China;
3. Shenyang Blower Works Group Corporation, Shenyang 110020, China

Received:2018-05-14 Online:2020-10-28 Published:2020-11-06

摘要/Abstract

摘要： 为了提升快堆二回路钠泵的空化性能,在确保其他几何参数不变的前提下,将原型样机的叶片进口边分别前伸三次构造出模型泵A、B、C.基于RNG k-ε湍流模型、Zwart-Gerber-Belamri和Schnerr&Sauer空化模型,对各模型泵进行三维定常单相、两相空化数值模拟,预测出各个模型泵的水力性能曲线、不同工况下的空化性能曲线和内流场参数.通过对比原型样机和各个模型泵的水力性能及内流场参数,得到结论:叶片进口边前伸对钠泵的水力性能影响不大,其中模型泵B的水力性能下降量最小;各模型泵的临界空化余量均不同程度降低,模型泵B的空化性能最优;适当地前伸叶片进口边位置,钠泵的空化性能明显提升.

关键词: 快堆二回路钠泵, 水力性能, 空化性能, 叶片进口边位置

Abstract: In order to improve cavitation performance of SCCP-SFP (the secondary circuit coolant pump of sodium-cooled fast reactor), model pumps A, B and C are constructed respectively by extending the blade inlet edge of the prototype three times on the premise of ensuring that other geometric parameters remain unchanged. Based on the RNG k-ε turbulence model, the Zwart-Gerber-Belamri and Schnerr&Sauer cavitation model, three-dimensional steady numerical simulation for each model pump under single-phase and two-phase cavitation conditions is carried out in this research, and then hydraulic performance curves, cavitation performance curves and internal flow field parameters of each model pump under different working conditions are predicted as well. By comparing the hydraulic performance and internal flow field parameters of the prototype with each model pump, conclusions may be drawn:The blade inlet edge extension has little effect on the hydraulic performance of the sodium pump, and the decline of hydraulic performance of the model pump B is the smallest.The critical cavitation margin for each model pump is reduced in varying degrees, and the cavitation performance of model pump B is the best.By properly extending the inlet edge of the blade, the cavitation performance of the sodium pump is obviously improved.

Key words: SCCP-SFP, hydraulic performance, cavitation performance, inlet edge position of blade

中图分类号:

TH311

杨从新, 余长虹, 于洪昌, 牛红军. 叶片进口边位置对快堆二回路钠泵空化性能的影响[J]. 兰州理工大学学报, 2020, 46(5): 53-60.

YANG Cong-xin, YU Chang-hong, YU Hong-chang, NIU Hong-jun. Effect of blade inlet position on cavitation performance of the secondary circuit coolant pump of sodium-cooled fast reactor[J]. Journal of Lanzhou University of Technology, 2020, 46(5): 53-60.

参考文献

[1] 郭晓梅,朱祖超,崔宝玲,等.诱导轮长短叶片位置对高速离心泵汽蚀性能的影响[J].工程热物理学报,2012,33(10):1695-1698.
[2] 李仁年,毕祯,黎义斌,等.诱导轮偏转角对离心泵叶轮空化性能的影响[J].排灌机械工程学报,2016,34(6):461-469.
[3] 罗先武,张瑶,彭俊奇,等.叶轮进口几何参数对离心泵空化性能的影响[J].清华大学学报(自然科学版),2008,48(5):836-839.
[4] 刘宜,李永乐,韩伟,等.离心泵的进口几何参数对泵空化性能的影响[J].兰州理工大学学报,2011,37(1):50-53.
[5] 杨军虎,王玥,郭斌,等.叶片进口边位置对双吸离心泵性能的影响分析[J].流体机械,2013,41(1):49-52.
[6] 陈然伟,曾永忠,刘小兵.叶片进口边位置对船用离心泵性能的影响——数值模拟与试验[J].科学技术与工程,2015,15(26):175-180.
[7] 周岭,施卫东,陆伟刚,等.叶轮进口边位置对深井离心泵水力性能的影响[J].农业机械学报,2012,43(3):78-82.
[8] 叶莉.叶片进口边位置对小流量工况下离心泵空化特性的影响[J].水电能源科学,2017(9):135-139.
[9] 何明辉,姬凯,叶丽婷.高效率低NPSHr离心泵的研发[J].机械制造,2016,54(8):30-32.
[10] 黄建德,邓强,黄炜.离心泵叶轮形状对汽蚀损伤的影响[J].核动力工程,2002,23(4):45-49.
[11] 关醒凡.现代泵技术手册[M].北京:宇航出版社,1995.
[12] 薛瑞,张淼,许战军,等.对不同空化模型的比较研究[J].西北水电,2014(2):85-89.
[13] 刘厚林,刘东喜,王勇,等.三种空化模型在离心泵空化流计算中的应用评价[J].农业工程学报,2012,28(16):54-59.
[14] 胡坤.ANSYS ICEM CFD工程实例详解[M].北京:人民邮电出版社,2014.
[15] 张涛,朱晓军,彭飞,等.近壁面处理对湍流数值计算的影响分析[J].海军工程大学学报,2013 25(6):104-108.