大型风力机叶片阻尼层厚度分析与抑颤研究

兰州理工大学学报 ›› 2021, Vol. 47 ›› Issue (4): 45-51.

大型风力机叶片阻尼层厚度分析与抑颤研究

杨瑞^*, 杨伟, 陈志龙

兰州理工大学能源与动力工程学院, 甘肃兰州 730050

收稿日期:2020-07-13 出版日期:2021-08-01 发布日期:2021-09-07
通讯作者: 杨瑞(1970-),男,河南商丘人,博士,教授.Email:562204233@qq.com
基金资助:
国家自然科学基金(51965034),国际合作专项(2014DFR60990)

Analysis of thickness of damping layer of large wind turbine blades and study on flutter suppression

YANG Rui, YANG Wei, CHEN Zhi-long

College of Energy and Power Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2020-07-13 Online:2021-08-01 Published:2021-09-07

摘要/Abstract

摘要： 为增强大型风力机叶片抑颤效果,从增加叶片的结构阻尼角度出发,以8 MW风力机叶片为研究对象,通过铺层设计和阻尼层位置设计为建立阻尼叶片有限元模型提供基础.分别以SHELL181单元和SOLID185单元模拟叶片上下蒙皮和阻尼层,对无阻尼叶片和阻尼叶片两种模型进行模态分析,探究阻尼层厚度变化对原叶片整体质量、固有频率及结构损耗因子的影响.确定8 MW风力机阻尼叶片阻尼层最佳敷设厚度,最后在最佳阻尼层厚度基础上对比分析两种叶片抑颤效果.结合结构损耗因子发现阻尼层厚度并非越大越好,经敷设最佳阻尼层厚度,原叶片可在质量增加极少的情况下提高抑颤能力.

关键词: 风力机叶片, 阻尼约束结构, 结构损耗因子, 抑颤

Abstract: In order to enhance the vibration suppression effect of large wind turbine blades, from the perspective of increasing the structural damping of the blades, the 8 MW wind turbine blades are taken as the object of study, and the design of the damping layer and the position of the damping layer are used to provide the basis for establishing the finite element model of the damping blade. SHELL181 and SOLID185 elements are used to simulate the upper and lower skins and damping layers of the blades, modal analysis are performed on the two models of undamped blades and damped blades, and the effect of the thickness change of the damping layer on the overall quality, natural frequency and structural loss factor of the original blades are discussed. The optimal laying thickness of the damping layer of the damping blade of the 8MW wind turbine is determined. Finally, based on the optimal damping layer thickness, the two types of blade vibration suppression effects are compared and analyzed. Combined with the structural loss factor, it is found that the thickness of the damping layer is not as large as possible. The optimum thickness of damping layer on the original blade can improve the ability of vibration suppression with little mass increase.

Key words: wind turbine blades, damping constraint structure, structural loss factor, flutter suppression

中图分类号:

TK83

杨瑞, 杨伟, 陈志龙. 大型风力机叶片阻尼层厚度分析与抑颤研究[J]. 兰州理工大学学报, 2021, 47(4): 45-51.

YANG Rui, YANG Wei, CHEN Zhi-long. Analysis of thickness of damping layer of large wind turbine blades and study on flutter suppression[J]. Journal of Lanzhou University of Technology, 2021, 47(4): 45-51.

参考文献

[1] 李德源,莫文威,夏鸿建,等.水平轴风力机柔性叶片气弹耦合分析 [J].太阳能学报,2015,36(3):734-742.
[2] 徐超,林松,王立峰,等.基于Layerwise理论的共固化黏弹阻尼复合材料动特性分析 [J].振动与冲击,2015, 34(1): 6-12.
[3] 孙大刚,赵树萍.风力机叶片约束阻尼结构建模及抑颤研究 [J].太阳能学报,2018,39(4):1165-1172.
[4] 韩斌慧,孙大刚,李占龙,等.风力机叶片阻尼抑颤特性分析 [J].太阳能学报,2014,35(7):1196-1201.
[5] SONG Z G,LI F M.Active aeroelastic flutter analysis and vibration control of supersonic composite laminated plate [J].Composite Structures,2012,94(2):702-713.
[6] 张洪宁,孙大刚,郭进军,等.风力机多层约束阻尼叶片抑颤性分析 [J].太原科技大学学报,2018,39(6):461-466.
[7] 孙大刚,李占龙.基于共固化阻尼层结构的风力机叶片抑颤分析 [J].振动与冲击,2013,32(19):93-99.
[8] BERTHELOT J M,ASSARAR M,SEFRANI Y,et al.Damping analysis of composite materials and structures [J].Composite Structures,2008,85(3):189-204.
[9] ROBINSON M J,KOSMATKA J B.Embedding viscoelastic damping materias in Low-Cost VARTM composite structures [J].SPIE Smart Structures and Materials,2005,57(6):349-360.
[10] 李仁年,刘有亮.大型风力机叶片铺层及模态分析 [J].太阳能学报,2015,36(1):49-53.
[11] 马志勇.大型风电叶片结构设计方法研究 [D].北京:华北电力大学,2011.
[12] 赵云峰.ZN系列粘弹性阻尼材料的性能及应用 [J].宇航材料工艺,2001(2):19-23.
[13] 申彦利,杨庆山,田玉基.模态应变能方法精确性和适用性研究 [J].工程力学,2008,25(6):18-21.
[14] 兰光明.弹性阻尼簧片减振器动力学仿真及疲劳寿命分析 [D].重庆:重庆大学,2014.
[15] 孙大刚,郭进军,张洪宁,等.风力机穿孔型阻尼抑颤叶片结构研究 [J].太阳能学报,2018,39(10):2962-2969.