深冷处理对Inconel 617合金组织和力学性能的影响

兰州理工大学学报 ›› 2023, Vol. 49 ›› Issue (1): 7-11.

深冷处理对Inconel 617合金组织和力学性能的影响

赵小龙¹, 罗晓阳¹, 俞丽丹², 汪彦江², 贾智^*2

1.酒钢集团宏兴钢铁股份有限公司碳钢薄板厂, 甘肃嘉峪关 735100;
2.兰州理工大学省部共建有色金属先进加工与再利用国家重点实验室, 甘肃兰州 730050

收稿日期:2022-06-24 出版日期:2023-02-28 发布日期:2023-03-21
通讯作者: 贾智(1985-),男,甘肃武威人,博士. Email:jiazhi@lut.edu.cn
基金资助:
国家自然科学基金(52265049),甘肃省杰出青年基金(18JR3RA134)

Effect of cryogenic treatment on Microstructure and mechanical properties of Inconel 617 alloy

ZHAO Xiao-long¹, LUO Xiao-yang¹, YU Li-dan², WANG Yan-jiang², JIA Zhi²

1. Carbon Steel Sheet Plant, Gansu Jiu Steel Group Hongxing Iron & Steel Co. Ltd., Jiayuguan 735100, China;
2. State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metals, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2022-06-24 Online:2023-02-28 Published:2023-03-21

摘要/Abstract

摘要： 深冷处理方法由于操作简单,价格低廉且对材料性能改善明显目前被广泛应用.采用深冷处理方法对Inconel 617合金进行了不同处理时间和次数条件下的试验.利用扫描电子显微镜(SEM)、电子背散射衍射(EBSD)、透射电子显微镜(TEM)分析了Inconel 617合金的微观组织结构,采用万能拉力试验机进行了室温下的拉伸试验.结果表明:深冷处理后Inconel 617合金的晶粒尺寸得到了细化.单次深冷处理12、24 h后合金的小角度晶界分数增大,这有助于合金拉伸强度和塑性的提高.但是深冷处理后合金中析出了大量的碳化物,降低了其强度.

关键词: Inconel 617合金, 深冷处理, 晶界, 碳化物

Abstract: Cryogenic treatment is widely used at present because of its simple operation, low price, and obvious improvement of material properties. Inconel 617 alloy was tested under different times and numbers using Cryogenic treatment. The microstructure of Inconel 617 alloy was investigated by scanning electron microscopy (SEM), electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM), and the tensile test was carried out at room temperature by the universal tensile testing machine. The results show that the grain size of Inconel 617 alloy is refined after cryogenic treatment. After single cryogenic treatment for 12, 24 h, the fraction of low-angle grain boundaries increases, which is helpful to improve the tensile strength and ductility of the alloy. However, after cryogenic treatment, a large number of carbides are precipitated in the alloy, which reduces its strength.

Key words: Inconel 617 alloy, cryogenic treatment, grain boundaries, carbides

中图分类号:

TG306

赵小龙, 罗晓阳, 俞丽丹, 汪彦江, 贾智. 深冷处理对Inconel 617合金组织和力学性能的影响[J]. 兰州理工大学学报, 2023, 49(1): 7-11.

ZHAO Xiao-long, LUO Xiao-yang, YU Li-dan, WANG Yan-jiang, JIA Zhi. Effect of cryogenic treatment on Microstructure and mechanical properties of Inconel 617 alloy[J]. Journal of Lanzhou University of Technology, 2023, 49(1): 7-11.

参考文献

[1] YANG S S,XUE L,LU W B,et al.Experimental study on the mechanical strength and dynamic strain aging of Inconel 617 using small punch test [J].Journal of Alloys and Compounds,2020,815:152447.
[2] 缪小吉,孙斐,范琪,等.Inconel 617镍基合金制备及耐蚀性分析 [J].热加工工艺,2017,46(2):40-41,46.
[3] 吉学英,晋芳伟.铝合金深冷处理研究进展 [J].热加工工艺,2019,48(16):25-28.
[4] 张旭,何文超,魏鑫鸿,等.深冷处理对H13钢组织和热疲劳性能的影响 [J].金属热处理,2021,46(10):81-85.
[5] 赵玲,刘光磊,张思源,等.固溶时效深冷复合处理对ZCuAl₁₀Fe₃Mn₂合金微观组织和热疲劳性能的影响 [J].材料工程,2019,47(12):63-70.
[6] CAI Huikun,WENG Zeju,GU Kaixuan,et al.Research progress of cemented carbide cryogenic treatment [J].Materials Bulletin,2019,33(1):178-185.
[7] 王瑶,李永刚,李文辉,等.深冷处理对TC4钛合金滚磨光整加工性能的影响 [J].稀有金属,2021,45(11):1289-1298.
[8] WU H Y,AI Z R,LIU X H.Research and application progress of cryogenic treatment technology for steel materials [J].Journal of Materials Heat Treatment,2013,34(12):1-8.
[9] 孙梅,熊能,周永芳.深冷处理对Al-7Si-2Cu-0.3Mg合金组织与力学性能的影响 [J].热加工工艺,2020,49(10):92-94.
[10] MOLINARI A,PELLIZZARI M,GIALANELLA S,et al.Effect of deep cryogenic treatment on the mechanical properties of tool steels [J].Journal of Materials Processing Technology,2001,118(1):350-355.
[11] 艾峥嵘,吴红艳,于凯,等.深冷处理对W6Mo5Cr4V2高速钢性能的影响 [J].特殊钢.2019,40(6):60-64.
[12] JIN F W,ZHOU Z M,QIU L M,et al.Studying status and application prospect of cryogenic treatment on HSS [J].Advanced Materials Research,2013,706-708:304-309.
[13] 胡文祥,李建新,史正良,等.深冷处理对合金铸铁组织及耐磨性能的影响 [J].金属热处理.2021,46(7):168-172.
[14] 饶楚楚,张新星.深冷处理对4Cr5MoSiV1热作模具钢磨损性能的影响 [J].锻压技术,2022,47(8):235-240.