渐开线变齿厚齿轮啮合冲击分析

兰州理工大学学报 ›› 2024, Vol. 50 ›› Issue (4): 29-35.

渐开线变齿厚齿轮啮合冲击分析

刘永平^*, 任忠涛, 董长斌, 魏永峭, 魏帅

兰州理工大学机电工程学院, 甘肃兰州 730050

收稿日期:2022-07-09 出版日期:2024-08-28 发布日期:2024-08-30
通讯作者: 刘永平(1973-),男,甘肃白银人,教授,博导.Email:cameliu@163.com
基金资助:
国家自然科学基金(52265008),甘肃省青年科技基金(23JRRA751)

Mesh contact impact analysis of involute beveloid gear

LIU Yong-ping, REN Zhong-tao, DONG Chang-bin, WEI Yong-qiao, WEI Shuai

School of Mechanical and Electronical Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2022-07-09 Online:2024-08-28 Published:2024-08-30

摘要/Abstract

摘要： 基于弹性接触动力学理论和齿轮传动物理模型,对渐开线变齿厚齿轮啮合冲击问题进行了分析,建立了变齿厚齿轮全齿啮合接触冲击模型.通过模拟轮齿啮合接触状态,对轮齿啮合区域展开了讨论,利用LS-DYNA软件进行接触碰撞分析,分别研究了冲击合力和冲击应力随转速和冲击位置的变化规律.结果表明:转速和冲击位置对冲击合力和冲击应力影响显著,且冲击最大应力主要集中在齿顶和轮齿的大小端附近;转速越大,轮齿受载面与非受载面之间的冲击应力相差越大.

关键词: 渐开线变齿厚齿轮, 啮合冲击, 接触分析, 冲击应力

Abstract: Based on the elastic contact dynamics theory and the physical model of gear transmission, the mesh impact problem of involute variable-thickness gears is analyzed, and the full tooth mesh contact impact model of variable-thickness gears is established; by simulating the gear mesh contact state, the gear mesh area is discussed, and the contact collision analysis is carried out by using LS-DYNA software to study the impact force and impact stress with speed and impact position respectively. The results show that the speed and impact position have a significant influence on the impact force. The results show that the rotational speed and impact position have a great influence on the impact force and impact stress, and the maximum impact stress is mainly concentrated near the top of the tooth and the large and small ends of the gear teeth; the larger the rotational speed is, the greater the difference in impact stress between the loaded and unloaded surfaces of the gear teeth.

Key words: involute beveloid gear, meshing impact, contact analysis, impact stress

中图分类号:

TH132

刘永平, 任忠涛, 董长斌, 魏永峭, 魏帅. 渐开线变齿厚齿轮啮合冲击分析[J]. 兰州理工大学学报, 2024, 50(4): 29-35.

LIU Yong-ping, REN Zhong-tao, DONG Chang-bin, WEI Yong-qiao, WEI Shuai. Mesh contact impact analysis of involute beveloid gear[J]. Journal of Lanzhou University of Technology, 2024, 50(4): 29-35.

参考文献

[1] 安宗文,陈川,刘波.风电齿轮箱传动系统的振动特性分析 [J].兰州理工大学学报,2017,43(6):38-44.
[2] 邬再新,姚凤伟,鄢诚挚,等.阶数和偏心率对椭圆齿轮滚齿加工运动特性的影响 [J].兰州理工大学学报,2017,43(6):45-49.
[3] 杜雪松,朱才朝,宋朝省,等.交错轴斜齿轮传动变齿厚技术现状与发展趋势 [J].机械设计,2012,29(7):1-7.
[4] 蒋汉军,王光建,褚志刚.变齿厚渐开线齿轮副啮合效率研究 [J].机械传动,2011,35(6):10-14.
[5] 石珍,王家序,肖科,等.平行轴直齿渐开线变厚齿轮接触应力分析 [J].机械设计与研究,2014,30(3):79-82.
[6] 倪高翔,朱才朝,宋朝省,等.平行轴渐开线变厚齿轮传动的几何设计与啮合特性分析 [J].西安交通大学学报,2016,50(5):57-64.
[7] YE X X,CHEN Y H,LU B B,et al.Study on a novel backlash adjustable worm drive via the involute helical beveloid gear meshing with dual-lead involute cylindrical worm [J].Mechanism and Machine Theory,2022,167:104466.
[8] 周尧,宋朝省,朱才朝,等.小角度相交轴渐开线圆柱与变厚齿轮传动修形啮合特性分析 [J].机械工程学报,2019,55(15):135-144.
[9] 唐进元,周炜,陈思雨.齿轮传动啮合接触冲击分析 [J].机械工程学报,2011,47(7):22-30.
[10] 杜坤.齿侧间隙对渐开线齿轮啮合冲击的影响分析 [D].太原: 太原理工大学,2015.
[11] 周琦.基于LS-DYN少齿数非对称斜齿轮动态特性分析 [J].机械传动,2017,41(3):120-128.
[12] 刘永平,董长斌,魏永峭.椭圆齿轮传动系统齿面接触与动态磨损分析 [J].吉林大学学报(工学版),2021,51(5):1620-1627.
[13] 牟彦铭,方宗德,张西金.弧齿锥齿轮啮入冲击理论分析 [J].华中科技大学学报(自然科学版),2018,46(8):7-11.
[14] 马登秋,魏永峭,叶振环,等.圆弧齿线圆柱齿轮啮合接触冲击研究 [J].振动与冲击,2018,37(7):123-131.
[15] 林腾蛟,李润方,陶泽光.齿轮传动三维间隙非线性冲击-动力接触特性数值仿真 [J].机械工程学报,2000,36(6):55-58.
[16] 林超,魏沛堂,朱才朝.平行轴变齿厚斜齿轮传动接触分析 [J].重庆大学学报,2012,35(12):1-6.
[17] GAO N,MEESAP C,WANG S Y,et al.Parametric vibrations and instabilities of an elliptical gear pair [J].Journal of Vibration and Control,2020,26(19/20):1721-1734.
[18] 曹磊,侯力,赵斐,等.变双曲圆弧齿线圆柱齿轮精确三维建模研究 [J].机械设计与制造,2019(增刊1):54-56.
[19] SUN R H,SONG C S,ZHU C C,et al.Tooth surface modelling and mesh behaviors for paralleled beveloid gears [J].Journal of Mechanical Design,2020,142(5):1-15.