考虑震损的法兰板加强型梁柱边节点抗火性能

兰州理工大学学报 ›› 2025, Vol. 51 ›› Issue (1): 129-137.

考虑震损的法兰板加强型梁柱边节点抗火性能

许继祥^*, 甘晓书, 姜旺

兰州理工大学土木工程学院, 甘肃兰州 730050

收稿日期:2021-07-07 出版日期:2025-02-28 发布日期:2025-03-03
通讯作者: 许继祥(1979-),男,甘肃陇西人,工学博士,教授.Email:xujixiangx@163.com
基金资助:
国家自然科学基金(51668040)

Fire resistance of flange plate plate-strengthened beam-column joints considering seismic damage

XU Ji-xiang, GAN Xiao-shu, JIANG Wang

School of Civil Engineering, Lanzhou University of Technology, Lanzhou 730050, China

Received:2021-07-07 Online:2025-02-28 Published:2025-03-03

摘要/Abstract

摘要： 为研究地震后法兰板加强梁翼缘型梁柱边节点的耐火性能,利用有限元软件ANSYS建立计算模型,将计算结果与已有试验结果进行对比验证计算模型的准确性和有效性.利用PUSHOVER方法,引入损伤变量D模拟不同地震等级下的震损.通过重启动分析法,将地震作用产生的残余应力和残余变形全部传递给各个节点的升温加载中,并对不同参数和不同损伤变量下法兰板加强梁翼缘型梁柱边节点的耐火性能、极限位移和失效机理进行深入分析.结果表明:损伤变量对法兰板加强梁翼缘型梁柱边节点的耐火性能起着主要影响作用,随着损伤变量D的增加,各节点的临界温度大幅度降低.参数α和γ的增加均能提高法兰板加强梁翼缘型梁柱边节点的耐火性能.法兰板加强梁翼缘型梁柱边节点的耐火性能随着参数β的增加而降低.

关键词: 震后火灾, 法兰板加强梁翼缘, 梁柱边节点, 损伤变量, 耐火性能

Abstract: In order to study the fire resistance performance of the flange plate strengthened beam-column joints with flange-reinforced plate after an earthquake, this paper used the finite element software ANSYS was utilized to establish the computational calculation model, and the calculation results were compared with the existing test results to verify the accuracy and efficacy effectiveness of the calculation model.The pushover method was employedused to simulate the seismic damage under different earthquake levels by introducing damage variables D. The residual stress and deformation caused by earthquake were transferred to the heating process by restart analysis method. The fire resistance, ultimate displacement and failure mechanism of flange beam-column joints with flange flange-strengthened beams under different parameters and damage variables were analyzed. The results showed that the damage variable had a major effect on the fire resistance of flange plate plate-strengthened beam-column joints. With the increase of damage variable D, the critical temperature of each connection was decreased greatly. Increasing the parameter α and γ can enhance the fire resistance of flange plate strengthened beam-column joints. While the increase of the β can impair the fire resistance of flange plate plate-strengthened beam-column joints.

Key words: post-earthquake fire, flange plate plate-strengthened beam flange, beam-column joints, damage variable, fire resistance

中图分类号:

TU391

许继祥, 甘晓书, 姜旺. 考虑震损的法兰板加强型梁柱边节点抗火性能[J]. 兰州理工大学学报, 2025, 51(1): 129-137.

XU Ji-xiang, GAN Xiao-shu, JIANG Wang. Fire resistance of flange plate plate-strengthened beam-column joints considering seismic damage[J]. Journal of Lanzhou University of Technology, 2025, 51(1): 129-137.

导出引用管理器 EndNote|Reference Manager|ProCite|BibTeX|RefWorks

链接本文: https://journal.lut.edu.cn/CN/

https://journal.lut.edu.cn/CN/Y2025/V51/I1/129

参考文献

[1] CHEN X,SHI G.Experimental study of end-plate joints with box columns[J].Journal of Constructional Steel Research,2018,143:307-319.
[2] NAJAFGHOLIPOUR M A,PEYKARI K,DEHGHAN S M.An alternative detail for continuity plates in steel beam to box-column moment-connections[J].Journal of Constructional Steel Research,2020,167:105952.
[3] SANEEI NIA Z,MAZROI A,GHASSEMIEH M.Cyclic performance of flange-plate connection to box column with finger shaped plate[J].Journal of Constructional Steel Research,2014,101:207-223.
[4] LIU Y,HUANG S S,BURGESS I.Investigation of a steel connection to accommodate ductility demand of beams in fire[J].Journal of Constructional Steel Research,2019,157:182-197.
[5] BAYAT K,SHEKASTEHBAND B.Seismic performance of beam to column connections with T-shaped slit dampers[J].Thin-Walled Structures,2019,141:28-46.
[6] YANG J,XIA X,WANG W,et al.Fire resistance of axially restrained Q690 H-shaped welded steel columns:Test,simulation and design[J].Journal of Constructional Steel Research,2021,177:106413.
[7] DOUNG P,SASAKI E.Load-deformation characteristics and performance of internal diaphragm connections to box columns[J].Thin-Walled Structures,2019,143:106221.
[8] YEGANEHFA A,MEHRPARVAR B,HADDAD SHARGH F.Effect of weld specifications on seismic performance of built-up box columns[J].Journal of Constructional Steel Research,2020,169:106012.
[9] SONG Q Y,HEIDARPOUR A,ZHAO X L,et al.Post-earthquake fire behavior of welded steel I-beam to hollow column connections:an experimental investigation[J].Thin-Walled Structures,2016,98:143-153.
[10] SONG Q Y,HEIDARPOUR A,ZHAO X L,et al.Performance of flange-welded/web-bolted steel I-beam to hollow tubular column connections under seismic load[J].Thin-Walled Structures,2017,116:250-264.
[11] SONG Q Y,HEIDARPOUR A,ZHAO X L,et al.Post-earthquake fire performance of flange-welded/web-bolted steel I-beam to hollow column tubular connections[J].Thin-Walled Structures,2017,116:113-123.
[12] 强旭红,石志伟,何旭,等.高强钢平齐式端板连接节点火灾后性能数值研究[J].同济大学学报(自然科学版),2019,47(4):482-490.
[13] 强旭红,任楚超,刘冰,等.火灾下高强钢端板连接节点力学性能有限元分析[J].同济大学学报(自然科学版),2017,45(9):1273-1283.
[14] 王秀丽,褚云朋,张彤,等.门式刚架整体式梁柱节点试验研究及有限元分析[J].兰州理工大学学报,2007,33(6):97-102.
[15] 江磊,王秀丽,杨文伟.梁柱连接节点不同腹板切角构造形式的应力分析[J].兰州理工大学学报,2013,39(2):106-109.
[16] 中华人民共和国国家质量监督检验检疫总局,中国国家标准化管理委员会.焊缝无损检测·超声检测·技术、检测等级和评定:GB/T 11345—2013[S].北京:中国标准出版社,2013.
[17] XU J,TONG Y,YHAN J,et al.Fire resistance of thin-walled tubular T-joints with internal ring stiffeners under post-earthquake fire[J].Thin-Walled Structures,2019,145:106433.
[18] ZHANG X,ZHENG S,ZHAO X.Seismic performance of steel beam-to-column moment connections with different structural forms[J].Journal of Constructional Steel Research,2019,158:130-142.
[19] 中华人民共和国住房和城乡建设部,中华人民共和国国家质量监督检验检疫总局.钢结构设计标准:GB 50017—2017[S].北京:中国建筑工业出版社,2017.