兰州理工大学学报

兰州理工大学学报 ›› 2021, Vol. 47 ›› Issue (6): 61-65.

• 机械工程与动力工程 • 上一篇    下一篇

基于ADAMS的涡旋压缩机动涡盘倾覆仿真及刚柔耦合分析

赵嫚*,李心庆   

  1. 兰州理工大学 石油化工学院, 甘肃 兰州 730050
  • 出版日期:2021-12-28 发布日期:2021-12-28
  • 通讯作者: 赵嫚(1979-),女,吉林双阳人,博士,副教授.Email:zhao_man79@163.com
  • 基金资助:
    国家自然科学基金(51265026)

Simulation and rigid-flexible coupling analysis of orbiting scroll overturning of scroll compressor based on ADAMS

ZHAO Man, LI Xin-qing   

  1. College of Petrochemical Technology, Lanzhou Univ. of Tech., Lanzhou 730050, China
  • Online:2021-12-28 Published:2021-12-28

PDF

493

摘要： 针对涡旋压缩机动涡盘倾覆和运动副间隙影响问题,在对其结构特征和受力情况分析的基础上,借助Solidworks建立涡旋压缩机转子系统三维模型,利用ADAMS对模型进行运动仿真与刚柔耦合模拟仿真.结果表明:定间隙时最大倾角发生在主轴周期内转角313.2°~330.6°,间隙对倾覆下动涡盘的质心位移没有影响,但会加大动涡盘的振动;动涡盘柔性化对其质心位移没有影响,但周期内其质心点位移径向方向最大值为刚性条件下的3.17倍,加剧了动涡盘的倾覆,降低了使用寿命.

关键词: 涡旋压缩机, 倾覆, 动力学仿真, 刚柔耦合

Abstract: Aiming at the problems of orbiting scrolloverturning and clearance of moving pair of scroll compressor, based on the analysis of its structural characteristics and force conditions, a three-dimensional model of the scroll compressor rotor system was established by Solidworks, and the motion simulation and rigid-flexible coupling simulation of the model were carried out by ADAMS. The simulation results show that the maximum inclinationangle occurs at the rotation angle of 313.2°~330.6° withinthe spindle cycle under the constant clearance value.The clearance has no effect on the centroid displacement of theorbiting scroll under the overturning, but will increase the vibration of theorbiting scroll. The flexibilization of the orbitingscroll has no effect on its centroid displacement, but the maxiumum value of its centroid point displacement in the radial direction is 3.17 times of that under the rigid condition, which intensifies the overturning of the orbiting scroll and reduces its service life.

Key words: scroll compressor, overturning, dynamic simulation, rigid-flexible coupling

中图分类号: