闭式斜盘轴向柱塞变量泵配流副空蚀现象分析

兰州理工大学学报 ›› 2022, Vol. 48 ›› Issue (1): 59-64.

闭式斜盘轴向柱塞变量泵配流副空蚀现象分析

王建森^*1,2, 何鑫龙¹, 杨威¹, 曹伟栋¹, 姚亦铭¹, 王峥嵘^1,2

1.兰州理工大学能源与动力工程学院, 甘肃兰州 730050;
2.甘肃省液压气动工程技术研究中心, 甘肃兰州 730050

收稿日期:2021-03-03 出版日期:2022-02-28 发布日期:2022-03-09
通讯作者: 王建森(1973-),男,甘肃华池人,博士,副教授.Email:wajase@163.com
基金资助:
甘肃省科技计划资助(17JR5RA120)

Analysis of cavitation phenomenon on the surface of distributor of closed swash plate axial piston variable pump

WANG Jian-sen^1,2, HE Xin-long¹, YANG Wei¹, CAO Wei-dong¹, YAO Yi-ming¹, WANG Zheng-rong^1,2

1. School of Energy and Power Engineering, Lanzhou Univ. of Tech., Lanzhou 730050;
2. Hydraulic and Pneumatic Engineering Technology Research Center of Gansu Province, Lanzhou 730050

Received:2021-03-03 Online:2022-02-28 Published:2022-03-09

摘要/Abstract

摘要： 以具有正开口双侧减振槽结构配流盘的闭式斜盘轴向柱塞变量泵为研究对象,考虑介质可压缩性,采用均质多相传输方程、标准k-ε湍流模型和全空化模型,研究了柱塞泵配流副表面空化流场时空动态演化过程,并与缸体配流表面空蚀破坏实验结果进行了比对.结果表明,缸体间隔区处气蚀破坏位置、破坏面积与配流过渡过程配流副表面空化发生的位置、空化持续时间及空化剧烈程度等因素高度关联.配流盘正开口引起柱塞腔至吸油腔渐扩减振槽处高压差强剪切窜油空化流动是造成缸体配流面空蚀破坏的主要原因,缸体间隔区前缘和后缘表面的气蚀破坏分别与柱塞腔升压和卸压过渡过程相关.

关键词: 闭式斜盘柱塞泵, 正开口配流, 减振槽, 空化空蚀, 数值分析

Abstract: Taking the closed swash plate axial piston variable displacement pump with a port plate with positive opening and double damping grooves as the research object, the homogeneous multiphase transport equation, standard k-ε turbulence model and full cavitation model are used to study the time-space dynamic evolution process of cavitation flow field on the surface of port pair of piston pump considering the compressibility of medium. It is found that the location and extent of cavitation erosion on the surface of cylinder block are highly correlated with the location, duration and severity of cavitation on the surface of valve pair during the transition process of valve distribution. The main cause of cavitation damage on the valve surface of the cylinder block is the high pressure difference between the piston cavity and the oil suction cavity caused by the positive opening of the valve plate. The cavitation damage on the leading edge and the trailing edge of the cylinder block spacer is respectively related to the transient process of pressure rise and pressure relief of the piston cavity.

Key words: closed swash plate axial piston pump, underlap valve plate, damping groove, cavitation erosion, numerical analysis

中图分类号:

TH137

王建森, 何鑫龙, 杨威, 曹伟栋, 姚亦铭, 王峥嵘. 闭式斜盘轴向柱塞变量泵配流副空蚀现象分析[J]. 兰州理工大学学报, 2022, 48(1): 59-64.

WANG Jian-sen, HE Xin-long, YANG Wei, CAO Wei-dong, YAO Yi-ming, WANG Zheng-rong. Analysis of cavitation phenomenon on the surface of distributor of closed swash plate axial piston variable pump[J]. Journal of Lanzhou University of Technology, 2022, 48(1): 59-64.

参考文献

[1] 吴晓明,高殿荣.液压变量泵(马达)变量调节原理与应用 [M].北京:机械工业出版社,2012.
[2] SEENIRAJ G K,IVANTYSYNOVA M.Impact of valve plate design on noise,volumetric efficiency and control effort in an axial piston pump [C]//Proceedings of the ASME 2006 International Mechanical Engineering Congress and Exposition,Fluid Power Systems and Technology.[S.l.]:ASME,2006:77-84.
[3] MA J E,FANG Y T,XU B,et al.Optimization of cross angle based on the pumping dynamics model [J].Journal of Zhejiang University-Science A Applied Physics and Engineering,2010,11(3):181-190.
[4] KIM T,KALBFLEISCH P,IVANTYSYNOVA M.The effect of cross porting on derived displacement volume [J].International Journal of Fluid Power,2014,15(2):77-85.
[5] WANG S.The analysis of cavitation problems in the axial piston pump [J].Journal of Fluids Engineering,2010,132 (7):074502.
[6] 王建森,李培勇,陈波,等.进口压力对正开口配流盘轴向柱塞变量泵斜盘力矩的影响 [J].兰州理工大学学报,2020,46(1):44-47.
[7] 王建森,张志伟,于昕海,等.正开口配流盘轴向柱塞变量泵输出特性预测 [J].液压气动与密封,2021,41(2):64-70.
[8] MA J E,XU B,ZHANG B,et al.Flow ripple of axial piston pump with computational fluid dynamic simulation using compressible hydraulic oil [J].Chinese Journal of Mechanical Engineering,2010,23(1):45-52.
[9] 王震,聂松林,尹方龙,等.基于PumpLinx纯水轴向柱塞泵配流盘卸荷槽结构的仿真分析 [J].液压与气动,2016(2):11-16.
[10] 田振东,黄家海,王灏,等.基于全空化模型的高压柱塞泵配流盘空化研究 [J].液压与气动,2018(1):17-22.
[11] YANG L J,YIN S,NIU Q N.Water hydraulic axial piston motor cavitation characteristics based on CFD technology [J].World Journal of Engineering,2017,14(3): 231-236.
[12] DING H,VISSER F C,JIANG Y,et al.Demonstration and validation of a 3D CFD simulation tool predicting pump performance and cavitation for industrial applications [J].Journal of Fluids Engineering,2011,133(1):011101.
[13] SINGHAL A K,ATHAVALE M M,LI H Y,et al.Mathematical basis and validation of the full cavitation model [J].Journal of Fluids Engineering,2002,124(3): 617-624.
[14] NYKANEN T H A,ESQUE S,ELLMAN A U.Comparison of different fluid models [C]//Proceedings of the Bath Workshop on Power Transmission and Motion Control.Bath,UK:Professional Engineering Publishing,2000:101-110.