热泵涡旋压缩机的热力学特性

兰州理工大学学报 ›› 2023, Vol. 49 ›› Issue (4): 42-48.

热泵涡旋压缩机的热力学特性

彭斌^*, 周天昊, 刘慧鑫, 刘帅, 杨宝坤, 何吉祥

兰州理工大学机电工程学院, 甘肃兰州 730050

收稿日期:2021-10-09 出版日期:2023-08-28 发布日期:2023-08-29
通讯作者: 彭斌(1976-),男,新疆伊宁人,博士,教授,博导. Email:Pengb2000@163.com
基金资助:
国家重点研发计划-科技助力经济2020重点专项(SQ2020YFF0420989),国家自然科学基金(51675254,51966009),兰州市人才创新创业项目(2020-Rc-23),甘肃省科技计划项目(20YF8GA057)

Thermodynamic characteristics of heat pump scroll compressor

PENG Bin, ZHOU Tian-hao, LIU Hui-xin, LIU Shuai, YANG Bao-kun, HE Ji-xiang

School of Mechanical and Electrical Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China

Received:2021-10-09 Online:2023-08-28 Published:2023-08-29

摘要/Abstract

摘要： 基于热泵涡旋压缩机几何参数、热力学第一定律、质量能量守恒定律等,建立了热泵涡旋压缩机的几何模型和热力学模型.利用欧拉法对所建热力学模型进行求解,得到了压缩机运行1个周期工作腔内工质温度、压力、质量的变化规律,并进一步分析了不同工况条件下热泵涡旋压缩机工作过程中泄漏量的变化规律.同时,通过搭建实验平台对所建热力学模型进行了验证.结果表明:吸气压力和吸气温度对压缩腔的影响最大,吸气压力降低0.1 MPa时第三压缩腔泄漏量降低9.45%,吸气温度降低5 ℃时第三压缩腔泄漏量降低6.841%;而转速的变化对涡旋压缩机各个工作腔泄漏量的影响比较平均;且实验值与模拟值接近,验证了模型的正确性,可为热泵涡旋压缩机的性能优化提供一定的理论参考.

关键词: 热泵涡旋压缩机, 热力学模型, 工况参数, 实验验证

Abstract: Based on the geometric parameters of heat pump scroll compressor, first law of thermodynamics, the laws of conservation of mass and energy and so on, the geometric model and thermodynamic model of the heat pump scroll compressor were established in this paper, and the method of Euler was used to solve this model, then the changing trend of temperature, pressure and mass of working fluid in the working chamber of compressor were obtained. The leakage changing law of the heat pump scroll compressor under different working conditions was analyzed. Finally, the established thermodynamic model was verified by building a test platform. The results show that the suction pressure and temperature have the greatest influence on the compression chamber. When the suction pressure decreases by 0.1 MPa, the leakage of the third compression chamber decreases by 9.45%. When the suction temperature decreases by 5 ℃, the leakage of the third compression chamber decreases by 6.841%. While the influence of speed change on the leakage of each working chamber of scroll compressor is average, and the experiment values are close to the simulation values, which verifies the correctness of the model. The research in this paper provides a some theoretical reference for the performance optimization of the scroll compressor of heat pumps.

Key words: heat pump scroll compressor, thermodynamic model, operating parameters, experiment verification

中图分类号:

TH128

彭斌, 周天昊, 刘慧鑫, 刘帅, 杨宝坤, 何吉祥. 热泵涡旋压缩机的热力学特性[J]. 兰州理工大学学报, 2023, 49(4): 42-48.

PENG Bin, ZHOU Tian-hao, LIU Hui-xin, LIU Shuai, YANG Bao-kun, HE Ji-xiang. Thermodynamic characteristics of heat pump scroll compressor[J]. Journal of Lanzhou University of Technology, 2023, 49(4): 42-48.

参考文献

[1] 王永强.余热-空气能热泵热水器系统的数学模型及试验研究 [D].兰州:兰州理工大学, 2020.
[2] RASHEED A,NA W H,LEE J W,et al.Development and validation of air-to-water heat pump model for greenhouse heating [J].Energies,2021,14(15):1-22.
[3] MORISHITA E,SUGIHARA M,INABA T,et al.Scroll compressor analytical model [C]//International Compressor Engineering Conference[S.l.]:Pardue University Press,1984:487-495.
[4] WANG Baolong,LI Xianting,SHI Wenxing.A general geometrical model of scroll compressors based on discretional initial angles of involute [J].International Journal of Refrigeration-Revue Internationale du Froid,2005,28(6):958-966.
[5] QIANG Jianguo,LIU Zhenquan.Scroll profiles in scroll compressors: General criteria and error sensitivity [J].International Journal of Refrigeration-Revue Internationale du Froid,2013,36(7):1796-1808.
[6] 刘涛,邬再新,刘振全.法向等距线法生成涡旋压缩机型线的研究 [J].机械工程学报,2004(6):55-58.
[7] 查海滨,宋永兴,王君,等.一种涡旋压缩机泄漏间隙内气体泄漏模型 [J].工程热物理学报,2016,37(7):1438-1443.
[8] 王君,宋永兴,查海滨,等.涡旋压缩机三维数值模拟及排气过程研究 [J].工程热物理学报,2016,37(4):766-769.
[9] 赵生显.新型无油涡旋压缩机的数学模型及试验研究 [D].兰州:兰州理工大学,2018.
[10] 彭斌,赵生显,李要红.新型无油涡旋压缩机性能 [J].中国机械工程,2018,29(24):2917-2924.
[11] CHEN Y,HALM N P,GROLL W A,et al.Mathematical modeling of scroll compressors-part I: compression process modeling [J].International Journal of Refrigeration-Revue Internationale du Froid,2002,25(6):731-750.
[12] CHEN Y,HALM N P,BRAUN J E,et al.Mathematical modeling of scroll compressors-part II: overall scroll compressor modeling [J].International Journal of Refrigeration-Revue Internationale du Froid,2002,25(6):751-764.
[13] SUNG J P,BOO J H,JUNG E G.Transient thermodynamic modeling of a scroll compressor using R22 refrigerant [J].Energies,2020,13(15):567-578.
[14] 王建吉,刘涛,胡天林.变截面无油涡旋压缩机轴向间隙泄漏模型的研究 [J].流体机械,2020,48(9):12-17,43.
[15] PARK Y C,KIM Y,CHO H.Thermodynamic analysis on the performance of a variable speed scroll compressor with refrigerant injection [J].International Journal of Refrigeration-Revue Internationale du Froid,2002,25(8):1072-1082.
[16] 李连生.涡旋压缩机 [M].北京:机械工业出版社,1998.
[17] 中国国家标准化管理委员会.GB/T 21362—2008 商业或工业用及类似用途的热泵热水机 [S].北京:[出版者不详],2008.
[18] 彭斌,张朋成.变截面涡旋膨胀机的数学模型及试验研究 [J].机械设计与制造工程,2018,47(7):115-120.