径向柔性涡旋压缩机接触冲击模型分析

兰州理工大学学报 ›› 2025, Vol. 51 ›› Issue (2): 31-37.

径向柔性涡旋压缩机接触冲击模型分析

刘涛^*, 金晓娜, 汪贺银, 麻德权

兰州理工大学机电工程学院, 甘肃兰州 730050

收稿日期:2022-12-07 出版日期:2025-04-28 发布日期:2025-04-29
通讯作者: 刘涛(1971-),女,甘肃武威人,博士,教授,博导.Email:cathyliu1999@126.com
基金资助:
国家自然科学基金(52265034)

Contact impact model analysis of radial flexible scroll compressor

LIU Tao, JIN Xiao-na, WANG He-yin, MA De-quan

School of Mechanical and Electrical Engineering, Lanzhou University of Technology, Lanzhou 730050, China

Received:2022-12-07 Online:2025-04-28 Published:2025-04-29

摘要/Abstract

摘要： 针对径向柔性涡旋压缩机由啮合误差引起的动、静涡旋齿间泄漏问题,基于接触动力学相关理论和动、静涡旋齿啮合原理,提出了动、静涡旋齿啮合碰撞冲击概念,建立了涡旋压缩机啮合接触冲击动力学模型.同时,采用Lankarani-Nikravesh非线性弹簧阻尼碰撞力模型建立了考虑啮合误差激励的动、静涡旋齿径向间隙接触碰撞模型.运用有限元数值计算方法,对2个模型在啮合点的变形量进行计算,研究在径向啮合接触碰撞力作用下涡旋压缩机的冲击模型.结果表明 :在啮合冲击激励下单个压缩周期内,动、静涡盘的涡旋齿变形量随着主轴转角的增大而增大;啮合接触冲击动力学模型与动、静涡旋齿径向间隙接触碰撞模型的啮合点变形趋势一致;动、静涡旋齿径向间隙接触碰撞模型的碰撞恢复系数对碰撞变形具有一定影响,因而通过调整碰撞恢复系数可以为啮合点的初始间隙取值提供依据,也可以为控制涡旋压缩机的径向泄漏提供新思路.

关键词: 径向柔性, 位移激励, 啮合接触冲击, 瞬态动力学

Abstract: Aiming at the leakage problem between dynamic and static scroll teeth caused by the meshing error of radial flexible scroll compressor, based on the contact dynamics theory and the meshing principle of dynamic and static scroll teeth, the concept of meshing collision impact between dynamic and static scroll teeth is put forward, and the meshing contact impact dynamic model of the scroll compressor is established. Based on Lankarani-Nikravesh nonlinear spring damping impact force model, a contact impact model of radial clearance between dynamic and static scroll teeth considering meshing error excitation is given. The deformation at the meshing point of the two models is calculated by the finite element numerical calculation method to investigate the impact model of scroll compressor under a radial meshing contact impact force. The results show that the deformation of scroll teeth increases with the increase of spindle rotation angle under meshing impact excitation in a compression period. The deformation trend at the meshing point obtained from the meshing contact impact dynamic model is consistent with that obtained from the radial clearance contact impact model of dynamic and static scroll teeth. Furthermore, the impact recovery coefficient in the radial clearance contact impact model of dynamic and static scroll teeth also has some influence on the impact deformation. Therefore, the initial clearance of the meshing point can be determined by controlling the collision recovery coefficient, and a new idea for controlling the radial leakage of the scroll compressor can be provided.

Key words: radial flexibility, displacement excitation, meshing contact shock, transient dynamics

中图分类号:

TH455

刘涛, 金晓娜, 汪贺银, 麻德权. 径向柔性涡旋压缩机接触冲击模型分析[J]. 兰州理工大学学报, 2025, 51(2): 31-37.

LIU Tao, JIN Xiao-na, WANG He-yin, MA De-quan. Contact impact model analysis of radial flexible scroll compressor[J]. Journal of Lanzhou University of Technology, 2025, 51(2): 31-37.

参考文献

[1] 侯才生,刘涛.基于Frenet标架的变截面涡旋型线构建与性能研究 [J].上海交通大学学报,2019,53(12):1495-1501.
[2] LU Y J,ROSKILLY A P,JIANG L,et al.Analysis of a 1kw organic ranking cycle using a scroll expander for engine coolant and exhaust heat recovery [J].Frontiers in Energy,2017,11(4):527-534.
[3] 李超,杨紫娟,丁凯,等.涡旋压缩腔径向泄漏对内部流场影响的分析 [J].流体机械,2016,44(1):14-18.
[4] 王建吉,刘涛,胡天林.变截面无油涡旋压缩机轴向间隙泄漏模型的研究 [J].流体机械,2020,48(9):12-17.
[5] 李超,刘红燕,张晓东,等.考虑机构误差影响的动涡旋泄漏特性分析 [J].流体机械,2020,48(2):22-28.
[6] 刘兴旺,余建平,齐学义,等.迷宫式涡旋齿和无迷宫涡旋齿切向密封性能对比 [J].机械工程学报,2010,46(18):183-188.
[7] 李超,韩昌亮,刘兴旺.涡旋压缩机微间隙泄漏量和轴向密封力的分形表征 [J].兰州理工大学学报,2013,39(6):45-48.
[8] RONG C,WEN W.Discussion on leaking characters in meso-scroll compressor [J].International Journal of Refrigeration,2009,32(6):1433-1441.
[9] CHEN Y,BRAUN J E,GROLL E A.Modeling of hermetic scroll compressors: model development [J].HVAC and R Research,2004,10(2):129-152.
[10] CHEN Y,GROLL E A,BRAUN J E.Modeling of hermetic scroll compressors: model validation and application [J].HVAC and R Research,2004,10(3):307-329.
[11] 查海滨,宋永兴,王君,等.一种涡旋压缩机泄漏间隙内气体泄漏模型 [J].工程热物理学报,2016,37(7):1438-1443.
[12] 张爱民.新型涡旋压缩机设计理论及加工研究 [D].兰州: 兰州理工大学,2006.
[13] MACHADO M,MOREIRA P,FLORES P,et al.Compliant contact force models in multibody dynamics:evolution of the Hertz contact theory [J].Mechanism and Machine Theory,2012,53: 99-121.
[14] 任冠林.组合型线涡旋压缩机设计理论研究 [D].兰州:兰州理工大学,2008.
[15] ZHENG D D,LIU G,HE S W.Comparative analysis of rub-impact dynamics of shrouded blades based on the bilinear hysteresis model and the Coulomb Friction model [J].Lubricants,2022,10(2):31-40.
[16] HU Y.Coulomb subduction zone wedge mechanics [J].Chinese Journal of Geophysics,2022,65(2):417-426.
[17] 查海滨,姜营,王君,等.涡旋压缩机单向流固耦合方法与涡旋齿变形分析 [J].流体机械,2015,43(12):22-27.
[18] 王建吉,刘涛,胡天林.变截面无油涡旋压缩机轴向间隙泄漏模型的研究 [J].流体机械,2020,48(9):12-17.