Journal of Lanzhou University of Technology ›› 2022, Vol. 48 ›› Issue (6): 1-7.

• Materials Science and Engineering •     Next Articles

Effect of bond coating pre-oxidation on TGO growth behaviors and high- temperature oxidation resistance of thermal barrier coating

AN Guo-sheng1,2, LI Wen-sheng1,2, FENG Li1,2, CHENG Bo1,2, LI Zi-yu2, ZHOU Lan3   

  1. 1. School of Materials Science and Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China;
    2. State Key Laboratory of Advanced Processing and Recycling of Nonferrous Metal, Lanzhou Univ. of Tech., Lanzhou 730050, China;
    3. School of Mechatronics Engineering, Lanzhou Univ. of Tech., Lanzhou 730050, China
  • Received:2022-03-14 Online:2022-12-28 Published:2023-03-21

Abstract: A dense Al2O3 layer was prepared at the ceramic/bond coating interface of thermal barrier coatings (TBC) by pre-oxidation technology. Isothermal oxidation tests were carried out at 1 100 ℃ to investigate the mechanism of Al2O3 layer reducing growth rates of thermally grown oxide (TGO) by inhibiting oxygen diffusion. The results showed that the TGO thickness and oxidation weight gain of as-sprayed TBC (A-TBC) and pre-oxidation TBC (P-TBC) increase by increasing the isothermal oxidation time. However, the P-TBC significant reduce oxygen diffusion in the entire oxidation process, and inhibite the TGO rapid growth at the initial stage of oxidation. This is contributed to P-TBC keeping a beneficial TGO structure, decreasing parabolic oxidation rate, and finally improving high-temperature oxidation resistance of TBC.

Key words: pre-oxidation, thermal barrier coating, thermally grown oxide

CLC Number: